MUB/T 042 400EC
Ventilatore plug fan isolato fino a 120°C in continuo EC
Numero articolo: 235389
• 100% speed controllable
• Up to 120°C medium temperature, continuous operation
• Multi-functional use, e.g. for kitchen exhaust air
• Pre-assembled isolator is standard
• Low sound level
• Easy to maintain and reliable
• Motor outside the air stream
• Integrated motor protection
• Potentiometer included for ease of commissioning
EC technology is intelligent technology; using integral electronic control which eliminates the slip losses in the motor and ensures that the motor always runs at optimal load and guarantees that the proportion of energy utilized effectively is many times higher and the energy usage considerably lower compared with AC motors. EC fans are notable for their economical use of energy and excellent ease of control. They can be varied in speed to match the airflow demand, and operate at high efficiency levels. For the same air volume, they consume distinctly less energy than AC fan drives. Another special feature of EC fans is their energy-saving potential not only at full load, but especially at part-load. When operating at part load, the energy used is much lower than with an asynchronous motor of equivalent output. Reduced energy usage guarantees a drop in operating costs. The power electronics are integrated in the motor housing.
All MUB/T-EC models have one potential-free terminal for error message. All motors are suitable to be used for 50/60Hz. The input voltage for single phase units can vary between 200 and 277V, for three phase units between 380 and 480V. Speed control by a 0-10V signal. The fans are delivered with a pre-wired potentiometer ( 0-10 V) that allowes you to easily find the required working point. All MUB/T-EC fans have impellers with backward curved blades, manufactured from aluminium. The MUB/T-EC fans are suitable for medium temperatures up to 120°C continuously. The casing consists of an aluminium frame with fibreglass reinforced plastic corners and double skin, galvanised steel panels with a 30 mm mineral wool insulation. Panels are removable, allowing flexible ventilation solutions - the air direction (90°) can easily be changed. With quick lock access door. The MUB/T-EC bottom panel is shaped as a condensate tray and incorporates a pre-mounted 1" drain plug. An isolator switch is mounted on the casing.
Several filter modules like f.e. activated carbon- or aluminum filters are available, calculated individually on the working point.
Parametri tecnici
| Dati nominali | ||
|---|---|---|
| Voltaggio (nominale) | 230 | V |
| Frequenza | 50; 60 | Hz |
| Fasi | 1~ | |
| Potenza in entrata | 550 | W |
| Corrente in entrata | 2,45 | A |
| Velocità rotazione girante | 1.512 | rpm |
| Portata aria | max 4.349 | m³/h |
| Temperatura aria trasportata | max 120 | °C |
| Temperatura max aria trasportata, sotto regolazione | 120 | °C |
| Protezione/Classificazione | ||
|---|---|---|
| Classe di protezione, motore | IP55 | |
| Classe d'isolamento | B |
| Dati in accordo a ERP | ||
|---|---|---|
| Pronto ErP | Non pertinente ErP |
| Dimensioni e pesi | ||
|---|---|---|
| Peso | 55,5 | kg |
| Altri | ||
|---|---|---|
| Tipo motore | EC |
The Level of Casing-Breakout-Noise depends on the quality of shielding the acoustic inlet and outlet noises.
The shown Level of Casing-Breakout-Noise will be reached only in case of 100 % shielding the acoustic inlet and outlet noise and a correspondingly low environment noise.
| MUB/T 042 | □A | □B | □C | □D | E |
400/450/500 |
690 |
690 |
590 |
548 |
21 |
| Nome documento | Tipo documento | |
|---|---|---|
| Installation, Operation and Maintenance instruction_001 | Manuale | |
| EU DECLARATION OF CONFORMITY_THERMOFANS_EN_004.PDF | Dichiarazione | |
| COMMISSIONING REPORT_FANS_160628_EN_001.PDF | Altro | |
| MUB-T 042 400 EC-POTI_37202_DE-EN.PDF | Collegamenti elettrici |
Sistema di regolazione per motori EC, scheda di gestione
Sezione filtrante con filtro in alluminio e a carboni attivi
Sezione filtrante con filtro in alluminio e a carboni attivi
