Sistema di regolazione semplificata motori EC (temperatura)
Numero articolo: 24805
• Simple to install, connect and set up
• 50/60HZ mains option
• Can be used with all 220V single phase and 380V three phase EC fans
• Built in sensor
• Conforms to CE standards EN 60730-1, EN 61000-6-3, EN 61000-6-1
• Demand control made simple
The controller compares room temperature with an adjustable set point and regulates a 0..10 V output signal applied to a ventilator with a PI algorithm in direct or reverse action based on jumper JP1 setting:
JP1 closed 1-2 = heating (reverse action)
JP1 closed 2-3 = cooling (direct action)
The range for knob set point is from 5 to 30°C
Dati nominali | ||
---|---|---|
Voltaggio (nominale) | 230 | V |
Voltaggio nominale | 110 a 240 | V |
Frequenza | 50; 60 | Hz |
Potenza in entrata | 0 | W |
Temperatura | -20 a 50 | °C |
Temperatura stabilita | 5 a 30 | °C |
Protezione/Classificazione | ||
---|---|---|
Classe di protezione | IP30 |
Dimensioni e pesi | ||
---|---|---|
Peso | 0,135 | kg |
Nome documento | Tipo documento | |
---|---|---|
IMO_EC-BASIC_EN_SV_REV3.PDF | Manuale | |
24805_Declaration of Conformity_EN.pdf | Dichiarazione |