N° article: 131045
A pre-heater is available as an accessory for Systemair Topvex units with counter flow heat exchanger. The pre-heater will compensate the lack of reheater capacity during bypass de-icing.
The pre-heater is connected to the Topvex Corrigo control and will be engaged only (default*) during bypass defrosting mode, to secure supply temperature. Depending of air flow and heating coil capacity the set point for the pre-heater can be set and optimized from the Corrigo control. (Set point is determined according to lack of reheater capacity during bypass de-icing.)
*(optional function settings can be selected from Corrigo menu. In example, conditioned outdoor air temperature)
The kit contains of 1 expansion module, 1 pre-heater, 1 outdoor air sensor and 1 instruction.
Unité | ||
---|---|---|
Fréquence | 50 | Hz |
Tension (nominale) | 400 | V |
Phases | 3~ | |
Type de tension | AC | |
Intensité | 30,3 | A |
Puissance installée | 21 000 | W |
Débit d'air | 1 296 à 8 640 | m³/h |
Température ambiante | max 30 | °C |
Type de produit | Chauffage électrique |
Connexions | ||
---|---|---|
Type de connexion | Rectangulaire |
Dimensions et poids | ||
---|---|---|
Poids | 7 | kg |
B | H | D |
600 |
400 |
500 |