N° article: 131010
A pre-heater is available as an accessory for Systemair Topvex units with counter flow heat exchanger. The pre-heater will compensate the lack of reheater capacity during bypass de-icing.
The pre-heater is connected to the Topvex Corrigo control and will be engaged only (default*) during bypass defrosting mode, to secure supply temperature. Depending of air flow and heating coil capacity the set point for the pre-heater can be set and optimized from the Corrigo control. (Set point is determined according to lack of reheater capacity during bypass de-icing.)
*(optional function settings can be selected from Corrigo menu. In example, conditioned outdoor air temperature)
The kit contains of 1 expansion module, 1 pre-heater, 1 outdoor air sensor and 1 instruction.
Unité | ||
---|---|---|
Fréquence | 50 | Hz |
Tension (nominale) | 400 | V |
Phases | 3~ | |
Type de tension | AC | |
Intensité | 13 | A |
Puissance installée | 9 000 | W |
Débit d'air | min. 420 | m³/h |
Température ambiante | max 30 | °C |
Type de produit | Chauffage électrique |
Connexions | ||
---|---|---|
Type de connexion | Circulaire | |
Conduit Circul d'aspiration | 315 | mm |
Conduit Circul de refoulement | 315 | mm |
Dimensions et poids | ||
---|---|---|
Poids | 7 | kg |
ø D = | 315 mm |
Caisson filtration raccordement Ø315mm pour filtre à poches