MUB 100 710EC Multibox
Centrifugal box fan, insulated, flexible outlet
Art. no.: 235399
• Integrated electronic motor protection
• Low noise level
• Flexible airflow direction due to removable panels
• Installation in any mounting position
• Safe and maintenance free operation
• Energy-saving
• Potentiometer included for ease of commissioning
• RS-485 interfaces for networking via MODBUS RTU from size 355
• AMCA-certified performance curves
The MUB-EC fans are driven by EC-external rotor motors. These are energy saving motors with high efficiency. The power electronics are integrated in the motor housing. From size 355 all models have one potential-free terminal for error message.
All motors are suitable to be used for 50/60Hz. The input voltage for single phase units can vary between 200 and 277V, for three phase units between 380 and 480V. Speed control by a 0-10V signal.
The fans are delivered with a pre-wired potentiometer ( 0-10 V) that allowes you to easily find the desired working point.
All models are equipped with impellers with backward curved blades, from size MUB 100 630 manufactured from aluminium. The casing consists of an aluminium frame with fibreglass reinforced plastic corners of PA6; highly shock-resistant.
The double skin panels are manufactured from galvanized steel with 30 mm mineralwool insulation. To avoid condensation the profile is provided with a separate chamber to fix the screws.
The panels are removable, any outlet side can be chosen, allowing flexible ventilation solutions.
The Multibox can also be used as extract- or supply air unit in air handling units. Installation in any mounting position is possible.
MUB with additional modules (filters, heaters etc.) are available as air handling units "K025, K042 or K062" on request!
The MUB-EC series in sizes 315 to 710 is licensed to bear the AMCA seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.
Ecodesign
| Product | ||
|---|---|---|
| Trade name | Systemair | |
| Product name | MUB 100 710EC |
| Ecodesign | ||
|---|---|---|
| ErP compliance | 2018 | |
| Unit category | NRVU | |
| Drive | Integrated VSD | |
| Unit type | UVU | |
| Heat recovery type | None | |
| Temperature ratio (UVU) | Not applicable | |
| qv nom | 4.1 | m³/s |
| P nom | 6.273 | kW |
| Ps nom | 903 | Pa |
| Fan efficiency | 59 | % |
| External Leakage | 5 | % |
| Sound power (LWA) | 89 | dB(A) |
Technical parameters
| Nominal data | ||
|---|---|---|
| Voltage (nominal) | 400 | V |
| Frequency | 50; 60 | Hz |
| Phases | 3~ | |
| Input power | 6,412 | W |
| Input current | 9.58 | A |
| Impeller speed | 1,203 | rpm |
| Air flow | max 26,838 | m³/h |
| Temperature of transported air | max 40 | °C |
| Max temperature of transported air, when speed controlled | 40 | °C |
| Protection/Classification | ||
|---|---|---|
| Enclosure class, motor | IP55 | |
| Insulation class | F |
| Data according to ErP | ||
|---|---|---|
| ErP ready | ErP 2016; ErP 2018 |
| Dimensions and weights | ||
|---|---|---|
| Weight | 172.5 | kg |
| Others | ||
|---|---|---|
| Motor type | EC |
The Level of Casing-Breakout-Noise depends on the quality of shielding the acoustic inlet and outlet noises.
The shown Level of Casing-Breakout-Noise will be reached only in case of 100 % shielding the acoustic inlet and outlet noise and a correspondingly low environment noise.
| MUB 100 | □A | □B | □C | □D | E |
630/710 |
1020 |
1020 |
920 |
878 |
21 |
