EC-Basic-H humidity
Humidity controller, 100-240VAC, 50/60 Hz
Art. no.: 24807
• Simple to install, connect and set up
• 50/60HZ mains option
• Can be used with all 220V single phase and 380V three phase EC fans
• Built in sensor
• Conforms to CE standards EN 60730-1, EN 61000-6-3, EN 61000-6-1
• Demand control made simple
The controller compares room humidity with an adjustable set point (SW1) and regulates a 0..10 V output signal applied to a ventilator with a proportional algorithm in direct or reverse action based on jumper JP1 setting:
JP1 closed 1-2 = reverse action
JP1 closed 2-3 = direct action
Technical parameters
| Nominal data | ||
|---|---|---|
| Voltage (nominal) | 265 | V |
| Rated voltage | 85 to 265 | V |
| Frequency | 50; 60 | Hz |
| Input power | 0 | W |
| Temperature | -20 to 50 | °C |
| Protection/Classification | ||
|---|---|---|
| Enclosure class | IP30 |
| Controller and Sensors | ||
|---|---|---|
| Humidity measurement | 0 to 100 | %RH |
| Dimensions and weights | ||
|---|---|---|
| Weight | 0.137 | kg |
