Art. no.: 5384
Electrical duct heater
Duct heater with spigot connection for standard spiral circular ducts. Manufactured from Aluzinc-coated sheet steel with a heating element in stainless steel. The CB heater has rubber seals on the connecting spigots.
The heater has double integral overheating protection: one with automatic and one with manual reset. Suitable for control by room thermostat or Pulser regulator (additional accessories).
The minimum air volume is based on a minimum air velocity of 1.5 m/s. These duct heaters are designed for a maximum output air temperature of 50°C.
The CB can be installed in a horizontal or vertical position. In a horizontal position, the connection box should be installed facing upwards, or rotated 90° to one side. Installation with the connection box facing downwards is not allowed.
Nominal data | ||
---|---|---|
Voltage (nominal) | 230 | V |
Voltage type | AC | |
Frequency | 50 | Hz |
Phases | 1~ | |
Input power | 2,100 | W |
Input current | 9.1 | A |
Air flow | min. 169 | m³/h |
Ambient and duct temperature | ||
---|---|---|
Permitted ambient temperature | max 30 | °C |
Dimensions and weights | ||
---|---|---|
Duct dimension; Circular, inlet | 200 | mm |
Duct dimension; Circular, outlet | 200 | mm |
Weight | 3.8 | kg |
Others | ||
---|---|---|
Duct cooler/heater | Electric heater | |
Duct connection type | Circular |
ø D = | 200 mm |
|