230/400V
Art. no.: 5144
Electronic temperature control
The Pulser M is a single or two-phase temperature regulator for controlling heater batteries.
This device is connected in series between the mains and an electric heater. The Pulser M has an integral regulator with input terminals for a main sensor together with min. or max. limit sensors. The integral sensor can be used when regulating room temperature. The power regulation is completely stepless thanks to what is known as time-proportional control, which means that the relationship between the ‘on’ and ‘off’ times is determined by the set temperature requirement. The total ‘on’ and ‘off’ time, or pulse period, is approximately 1 minute.
Nominal data | ||
---|---|---|
Voltage (nominal) | 230 | V |
Frequency | 50; 60 | Hz |
Phases | 1~ | |
Input current | 16 | A |
Temperature reduction at night | 10 | °C |
Temperature adjustment | 0 to 30 | °C |
Protection/Classification | ||
---|---|---|
Enclosure class | IP20 |
Controller and Sensors | ||
---|---|---|
Input power, heater | 3.6 | kW |
Permitted ambient humidity | 0 to 90 | %RH |
Ambient and duct temperature | ||
---|---|---|
Permitted ambient temperature | 0 to 30 | °C |
Dimensions and weights | ||
---|---|---|
Depth | 43 | mm |
Height | 150 | mm |
Width | 94 | mm |
Weight | 0.32 | kg |
Document filename | Document filetype | |
---|---|---|
PULSER-M_DATASHEET_EN.PDF | Brochure | |
PULSER_M_IMO_multilingual.PDF | Manual | |
EC_PULSER_RANGE.pdf | Declaration |