Cod produs: 24808
• Simple to install, connect and set up
• 50/60HZ mains option
• Can be used with all 220V single phase and 380V three phase EC fans
• Built in sensors
• Conforms to CE standards EN 60730-1, EN 61000-6-3, EN 61000-6-1
• Demand control made simple
The controller compares room temperature with an adjustable set point (knob) and regulates a 0..10 V proportional integral INTERNAL 1 SIGNAL in direct or reverse action based on jumper JP1 setting:
JP1 closed 1-2 = heating (reverse action)
JP1 closed 2-3 = cooling (direct action)
The controller compares also CO2 with an adjustable set point (SW3) and regulates a 0..10 V proportional INTERNAL 2 SIGNAL in direct action.
The output signal applied to a ventilator is the maximum between INTERNAL 1 SIGNAL and INTERNAL 2 SIGNAL.
The range for temperature knob set point is from 5 to 30°C
Date nominale | ||
---|---|---|
Tensiune nominală | 85 către 265 | V |
Frecvență | 50; 60 | Hz |
Putere de intrare | 2 | W |
Temperatură | -20 către 50 | °C |
Punctul de temperatură stabilit | 5 către 30 | °C |
Protecție / Clasificare | ||
---|---|---|
Clasa de incintă | IP30 |
Dimensiuni și greutăți | ||
---|---|---|
Greutate | 0,147 | kg |
Altele | ||
---|---|---|
Măsurare CO2 | 0 către 2000 | ppm |