Acest produs nu se mai fabrică

X-DVV 800D6-XL/120°C

Cod produs: 95323

• Motor outside of the air stream
• Vertical exhaust of media up to 120°C permanently
• Suitable for coastal applications
• Wide range of accessories
• IE2 high efficiency motor (single speed) respectively two speed IE1 motor inside
• PTC thermal protection serial built-in motor
• Sucking side connection acc. EUROVENT
• Sound attenuator available as accessorie HSDV (preferable factory mounted, the marking of the fan with silencer is DVVI)

Octagonal casing is manufactured from seawater resistant aluminium. The base frame consists of hot-dip galvanised steel. Impeller with backward-curved blades is manufactured from steel and galvanized. For C4 (and up) corrosion category additional surface protection of exposed parts is recommended.

Motor cooling with fresh air via air duct. The motor protection is provided by customers. Service switch serial on cooling duct. For speed control of single speed motors use combination of frequency inverter and appropriate filter to motor side (sine or du/dt), respectively observe instructions. At frequency controlled units additional EMC protection could be needed (see also items with EMC protection - marked EMC, other are available on request).

Ecodesign

Produs
Nume comercial Systemair
Numele produsului DVV 800D6-XL/120°C
Ecodesign
Conformitatea ErP 2016
Categoria unității NRVU
Unitate MSD sau VSD extern
Tip unitate UVU
Tip schimbător de căldură Nimic
Interval de temperatură (UVU) Nu este aplicabil
qv nom 4,861 m³/s
P nom 5,595 kW
Ps nom 590 Pa
Eficiență ventilator 51,3 %
Scurgeri externe 0 %
Nivel de putere sonor LWA 93 dB(A)

Parametri tehnici

Date nominale
Tensiune (nominală) 400 V
Frecvență 50 Hz
Faza (e) 3~
Conexiune la circuitul motorului D
Putere de intrare 5595 W
Putere nominală la arbore (P2) 5,5 kW
Curent de pornire 66 A
Curent de pornire (pornire Y - D) 22 A
Curent de intrare 11,2 A
Viteza elicei 955 rpm
Flux de aer max 26500 m³/h
Temperatura aerului transportat max 120 °C
Date acustice
Nivelul presiunii sonore la 10 m (câmp liber) 64 dB(A)
Nivelul presiunii sonore la 4 m (câmp liber) 71 dB(A)
Protecție / Clasificare
Clasa de incintă, motor IP55
Clasa de izolare F
Date conform ErP
Gata pentru ErP ErP 2016; Nu este relevant pentru ErP
Dimensiuni și greutăți
Dimensiune tubulatură; Circular, intrare 800 mm
Dimensiune tubulatură; Circular, ieșire 800 mm
Greutate 225 kg
Altele
Tip conexiune tubulatură Circular
Tip motor AC
Lock the service switch in position ON to prevent unintended switch OFF!

Lock is not in scope of fan.

Upper connection: starting in star (not for continuous operation!)

Lower connection: operation in delta

Mid-frequency band, Hz

800D6-XL

Hz

Tot

63

125

250

500

1k

2k

4k

8k

LwA Inlet

dB(A)

91

67

78

80

87

82

81

77

64

LwA Surrounding

dB(A)

93

69

80

82

89

84

83

79

66

Measuring point: qv = 6 m3/s, ps = 370Pa

DVV 800-LOW

Roof fan, vertical blowing. The DVV-XS...XP/120 radial fans are intended for the normal daily ventilation, temperature of air up to 120°C. The base frame with inlet cone is made of hot-dip galvanized steel sheet. The outer octagonal casing from seawater-resistant aluminium. Bird protection grill inside casing. The air stream is carried out through annular space between the casing and the motor housing. The fan has a backward curved radial impeller made of steel and galvanized. With hub and secured bolted joint directly assembled on the motor shaft. Dynamically balanced according to ISO 1940 T1 quality class G6,3. Driven by an IEC IE2 high efficiency motor, single speed. PTC thermal protection serial built-in electric motor. Cooling of the motor with ambient air through an air duct in underpressure system. The motor protection is provided by customers. Connection the fan to the mains in service switch outside on the casing. For speed control use combination of frequency inverter and appropriate filter to motor side (sine or du/dt), respectively observe instructions. EMC protection (for frequency control, if needed) on request, serial not EMC protected cables, cable glands and service switches are used. Flange connection according to EUROVENT. An additional sound attenuator HSDV (preferable factory mounted) is available as accessory (the marking of the fan with silencer is DVVI).