Cod produs: 5387
Electrical duct heater
Duct heater with spigot connection for standard spiral ducts. Manufactured from Aluzinc-coated sheet steel with a heating element in stainless steel. The heater has integral overheating protection with a manual reset function. The CB heater has rubber seals on the connecting spigots. Suitable for control by room thermostat or Pulser. The minimum air volume is based on a minimum air velocity of 1.5 m/s. These duct heaters are designed for a maximum output air temperature of 50°C. The CB can be installed in a horizontal or vertical duct. In a horizontal duct, the connection box should be installed facing upwards, or rotated 90° to one side. Installation with the connection box facing downwards is not allowed.
Date nominale | ||
---|---|---|
Tensiune (nominală) | 400 | V |
Faza (e) | 3~ | |
Putere de intrare | 12000 | W |
Curent de intrare | 17,3 | A |
Flux de aer | min. 430 | m³/h |
Controler și senzori | ||
---|---|---|
Temperatura ambiantă permisă | max 30 | °C |
Dimensiuni și greutăți | ||
---|---|---|
Dimensiune tubulatură; Circular, intrare | 315 | mm |
Dimensiune tubulatură; Circular, ieșire | 315 | mm |
Greutate | 7,4 | kg |
Altele | ||
---|---|---|
Răcire / încălzitor de conductă | Incalzitor electric | |
Tip conexiune tubulatură | Circular |
A | = | Heating elements |
B |
= |
Over heat protection with automatic reset |
C |
= |
Over heat protection with manual reset |
E |
= |
Interlocking |
F |
= |
All phase breaker |
H |
= |
Thyristor type Pulser or TTC |
ø D = | 315 mm |