Acest produs nu se mai fabrică

CB 160-5,0 400V/2 Duct heater

Cod produs: 5383

Electrical duct heater

Duct heater with spigot connection for standard spiral ducts. Manufactured from Aluzinc-coated sheet steel with a heating element in stainless steel. The heater has integral overheating protection with a manual reset function. The CB heater has rubber seals on the connecting spigots. Suitable for control by room thermostat or Pulser. The minimum air volume is based on a minimum air velocity of 1.5 m/s. These duct heaters are designed for a maximum output air temperature of 50°C. The CB can be installed in a horizontal or vertical duct. In a horizontal duct, the connection box should be installed facing upwards, or rotated 90° to one side. Installation with the connection box facing downwards is not allowed.

Parametri tehnici

Date nominale
Tensiune (nominală) 400 V
Faza (e) 2~
Putere de intrare 5000 W
Curent de intrare 12,5 A
Flux de aer min. 115 m³/h
Controler și senzori
Temperatura ambiantă permisă max 30 °C
Dimensiuni și greutăți
Dimensiune tubulatură; Circular, intrare 160 mm
Dimensiune tubulatură; Circular, ieșire 160 mm
Greutate 4 kg
Altele
Răcire / încălzitor de conductă Incalzitor electric
Tip conexiune tubulatură Circular
A = Heating elements

B

=

Over heat protection with automatic reset

C

=

Over heat protection with manual reset

E

=

Interlocking

F

=

All phase breaker

H

=

Thyristor type Pulser or TTC

ø D = 160 mm