S-DT 16

Urządzenie ochrony termicznej TK (do montażu na ścianę)

Nr katalogowy: 161206

Motor protection switch by evaluation of the thermal contact,

additional thermal over-current release or magnetic short-circuit trip as line circuit breaker.

The S-DT 16E (for rail mounting) and the S-DT 16 (for wall mounting) switch off the supply voltage to the motor when the thermal contact in the motor windings is tripped. The motor protector is connected to a 400V supply and also to the thermal contact in the motor.

The motor protector is reset by pressing the black button as soon as the motor windings have cooled sufficiently. The motor protector can also be used in conjunction with a transformer. Manually turn on and off with connected motors possible.

An alarm contact (K) is available as an accessory. The alarm contact has an integral potential-free contact producing an external signal when the relay has been tripped.

Dane techniczne

Dane nominalne
Napięcie (nominalne) 400 V
Częstotliwość 50; 60 Hz
Zasilanie 3~
Prąd 10 do 16 A
Stopień ochrony / Klasyfikacja
Stopień ochrony IP55
Temp. otoczenia i w kanale
Dozwolony poziom temp. otoczenia -25 do 40 °C
Wymiary i masa
Głębokość 97 mm
Wysokość 135 mm
Szerokość 80 mm
Masa 0,6 kg
Images Dimensions - S-DT 16 - Systemair

Motor protection switch for motors with lead out thermal contacts. Automatic cut out of motor when thermal contact trips (motor overheating). Reset by pressing the black button as soon as the motor windings have cooled sufficiently.

Automatic restart after power failure. Can also be used in conjunction with a transformer. An alarm contact is available as an accessory. The alarm contact has an integral potential-free contact producing an external signal when the relay has been tripped. For wall installation.

Alarm contact K(ZB) S-ET/S-DT - Systemair
Nr katalogowy: 161221
Alarm contact K(ZB) S-ET/S-DT

do S-ET / S-DT, 1x NC 1x NO

.