X-CB 100-0,6 230V/1
Itemnummer: 5376
Electrical duct heater
Duct heater with spigot connection for standard spiral circular ducts. Manufactured from Aluzinc-coated sheet steel with a heating element in stainless steel. The CB heater has rubber seals on the connecting spigots.
The heater has double integral overheating protection: one with automatic and one with manual reset. Suitable for control by room thermostat or Pulser regulator (additional accessories).
The minimum air volume is based on a minimum air velocity of 1.5 m/s. These duct heaters are designed for a maximum output air temperature of 50°C.
The CB can be installed in a horizontal or vertical position. In a horizontal position, the connection box should be installed facing upwards, or rotated 90° to one side. Installation with the connection box facing downwards is not allowed.
Technische parameters
| Nominale gegevens | ||
|---|---|---|
| Spanning (nominaal) | 230 | V |
| Fasen | 1~ | |
| Ingangsvermogen | 600 | W |
| Ingangsstroom | 2,6 | A |
| Luchtstroom | min. 45 | m³/h |
| Omgeving en kanaaltemperatuur | ||
|---|---|---|
| Toegestane omgevingstemperatuur | max 30 | °C |
| Afmetingen en gewichten | ||
|---|---|---|
| Kanaalafmeting; Rond, aanvoer | 100 | mm |
| Kanaalafmeting; Circulair, afblaas | 100 | mm |
| Gewicht | 2,1 | kg |
| Anderen | ||
|---|---|---|
| Kanaalkoeler/verwarmer | Elektrische verwarming | |
| Type kanaalverbinding | Rond |
| ø D = | 100 mm |
