Itemnummer: 5374
Electrical duct heater
Duct heater with spigot connection for standard spiral circular ducts. Manufactured from Aluzinc-coated sheet steel with a heating element in stainless steel. The CB heater has rubber seals on the connecting spigots.
The heater has double integral overheating protection: one with automatic and one with manual reset. Suitable for control by room thermostat or Pulser regulator (additional accessories).
The minimum air volume is based on a minimum air velocity of 1.5 m/s. These duct heaters are designed for a maximum output air temperature of 50°C.
The CB can be installed in a horizontal or vertical position. In a horizontal position, the connection box should be installed facing upwards, or rotated 90° to one side. Installation with the connection box facing downwards is not allowed.
Nominale gegevens | ||
---|---|---|
Spanning (nominaal) | 400 | V |
Spanning type | AC | |
Frequentie | 50 | Hz |
Fasen | 2~ | |
Ingangsvermogen | 6.000 | W |
Ingangsstroom | 15 | A |
Luchtstroom | min. 420 | m³/h |
Omgeving en kanaaltemperatuur | ||
---|---|---|
Toegestane omgevingstemperatuur | max 30 | °C |
Afmetingen en gewichten | ||
---|---|---|
Kanaalafmeting; Rond, aanvoer | 315 | mm |
Kanaalafmeting; Circulair, afblaas | 315 | mm |
Gewicht | 5,9 | kg |
Anderen | ||
---|---|---|
Kanaalkoeler/verwarmer | Elektrische verwarming | |
Type kanaalverbinding | Rond |
ø D = | 315 mm |