Prekės Numeris: 131045
A pre-heater is available as an accessory for Systemair Topvex units with counter flow heat exchanger. The pre-heater will compensate the lack of reheater capacity during bypass de-icing.
The pre-heater is connected to the Topvex Corrigo control and will be engaged only (default*) during bypass defrosting mode, to secure supply temperature. Depending of air flow and heating coil capacity the set point for the pre-heater can be set and optimized from the Corrigo control. (Set point is determined according to lack of reheater capacity during bypass de-icing.)
*(optional function settings can be selected from Corrigo menu. In example, conditioned outdoor air temperature)
The kit contains of 1 expansion module, 1 pre-heater, 1 outdoor air sensor and 1 instruction.
Įrenginys | ||
---|---|---|
Dažnis | 50 | Hz |
Nominali įtampa | 400 | V |
Fazės | 3~ | |
Dažnis | AC | |
Srovė | 30,3 | A |
El. galia (P1) | 21 000 | W |
Oro srautas | 1 296 į 8 640 | m³/h |
Aplinkos temperatūros leidžiamas intervalas | maks 30 | °C |
Produkto tipas | Elektrinis šildytuvas |
Sujungimai | ||
---|---|---|
Ortakio pajungimo tipas | Stačiakampis |
Išmatavimai ir svoriai | ||
---|---|---|
Svoris | 7 | kg |
B | H | D |
600 |
400 |
500 |