CB 355-9,0 400V/3 kanal. šild.
Prekės Numeris: 5389
Electrical duct heater
Duct heater with spigot connection for standard spiral circular ducts. Manufactured from Aluzinc-coated sheet steel with a heating element in stainless steel. The CB heater has rubber seals on the connecting spigots.
The heater has double integral overheating protection: one with automatic and one with manual reset. Suitable for control by room thermostat or Pulser regulator (additional accessories).
The minimum air volume is based on a minimum air velocity of 1.5 m/s. These duct heaters are designed for a maximum output air temperature of 50°C.
The CB can be installed in a horizontal or vertical position. In a horizontal position, the connection box should be installed facing upwards, or rotated 90° to one side. Installation with the connection box facing downwards is not allowed.
Techniniai parametrai
| Nominalieji duomenys | ||
|---|---|---|
| Nominali įtampa | 400 | V |
| Dažnis | AC | |
| Dažnis | 50 | Hz |
| Fazės | 3~ | |
| El. galia (P1) | 9 000 | W |
| Srovė | 13 | A |
| Oro srautas | min. 534 | m³/h |
| Temperaturos sritis, aplinkoje ir ortakyje | ||
|---|---|---|
| Aplinkos temperatūros leidžiamas intervalas | maks 30 | °C |
| Išmatavimai ir svoriai | ||
|---|---|---|
| Ortakio matmuo; apvalus, įtekėjimas | 355 | mm |
| Ortakio matmuo; apvalus, ištekėjimas | 355 | mm |
| Svoris | 7,5 | kg |
| Kita | ||
|---|---|---|
| Ortakis vėsinimui / šildymui | Elektrinis šildytuvas | |
| Ortakio pajungimo tipas | Apskritas |
| ø D = | 355 mm |
