CB 125-0,6 230V/1

Numero articolo: 5289

Electrical duct heater

Duct heater with spigot connection for standard spiral circular ducts. Manufactured from Aluzinc-coated sheet steel with a heating element in stainless steel. The CB heater has rubber seals on the connecting spigots.

The heater has double integral overheating protection: one with automatic and one with manual reset. Suitable for control by room thermostat or Pulser regulator (additional accessories).

The minimum air volume is based on a minimum air velocity of 1.5 m/s. These duct heaters are designed for a maximum output air temperature of 50°C.

The CB can be installed in a horizontal or vertical position. In a horizontal position, the connection box should be installed facing upwards, or rotated 90° to one side. Installation with the connection box facing downwards is not allowed.

Parametri tecnici

Dati nominali
Voltaggio (nominale) 230 V
Tipo voltaggio AC
Frequenza 50 Hz
Fasi 1~
Potenza in entrata 600 W
Corrente in entrata 2,6 A
Portata aria min. 66 m³/h
Temperatura ambiente e canale
Temperatura ambiente consentita max 30 °C
Dimensioni e pesi
Dimensione condotto; Circolare, immissione 125 mm
Dimensione condotto; Circolare, espulsione 125 mm
Peso 2,5 kg
Altri
Condotto freddo/caldo Riscaldatore elettrico
Tipo connessione condotto Circolare
Images Dimensions - CB 125-0,6 230V/1 - Systemair
ø D = 125 mm

Pulser M - Systemair
Numero articolo: 5144
Pulser M .
DTV200 - Systemair
Numero articolo: 6261
DTV200 .
DTV500A - Systemair
Numero articolo: 96807
DTV500A .