Preheat. kit Topvex CB315 EL
Batteria elettrica circolare da canale di preriscaldamento
Numero articolo: 131010
A pre-heater is available as an accessory for Systemair Topvex units with counter flow heat exchanger. The pre-heater will compensate the lack of reheater capacity during bypass de-icing.
The pre-heater is connected to the Topvex Corrigo control and will be engaged only (default*) during bypass defrosting mode, to secure supply temperature. Depending of air flow and heating coil capacity the set point for the pre-heater can be set and optimized from the Corrigo control. (Set point is determined according to lack of reheater capacity during bypass de-icing.)
*(optional function settings can be selected from Corrigo menu. In example, conditioned outdoor air temperature)
The kit contains of 1 expansion module, 1 pre-heater, 1 outdoor air sensor and 1 instruction.
Parametri tecnici
| Unità | ||
|---|---|---|
| Frequenza | 50 | Hz |
| Voltaggio (nominale) | 400 | V |
| Fasi | 3~ | |
| Tipo voltaggio | AC | |
| Corrente in entrata | 13 | A |
| Potenza in entrata | 9.000 | W |
| Portata aria | min. 420 | m³/h |
| Temperatura ambiente consentita | max 30 | °C |
| Tipo prodotto | Riscaldatore elettrico |
| Connessioni | ||
|---|---|---|
| Tipo connessione condotto | Circolare | |
| Dimensione condotto; Circolare, immissione | 315 | mm |
| Dimensione condotto; Circolare, espulsione | 315 | mm |
| Dimensioni e pesi | ||
|---|---|---|
| Peso | 7 | kg |
| ø D = | 315 mm |
