EC-Basic-CO2/T

Sistema di regolazione semplificata motori EC (CO2 e T)

Numero articolo: 24808

• Simple to install, connect and set up

• 50/60HZ mains option

• Can be used with all 220V single phase and 380V three phase EC fans

• Built in sensors

• Conforms to CE standards EN 60730-1, EN 61000-6-3, EN 61000-6-1

• Demand control made simple

The controller compares room temperature with an adjustable set point (knob) and regulates a 0..10 V proportional integral INTERNAL 1 SIGNAL in direct or reverse action based on jumper JP1 setting:

JP1 closed 1-2 = heating (reverse action)

JP1 closed 2-3 = cooling (direct action)

The controller compares also CO2 with an adjustable set point (SW3) and regulates a 0..10 V proportional INTERNAL 2 SIGNAL in direct action.

The output signal applied to a ventilator is the maximum between INTERNAL 1 SIGNAL and INTERNAL 2 SIGNAL.

The range for temperature knob set point is from 5 to 30°C

Parametri tecnici

Dati nominali
Voltaggio nominale 85 a 265 V
Frequenza 50; 60 Hz
Potenza in entrata 2 W
Temperatura -20 a 50 °C
Temperatura stabilita 5 a 30 °C
Protezione/Classificazione
Classe di protezione IP30
Dimensioni e pesi
Peso 0,147 kg
Altri
Misura del CO2 0 a 2.000 ppm
Images Dimensions - EC-Basic-CO2/T - Systemair