CB 315-3,0 230V/1

Batteria elettrica circolari

Numero articolo: 5386

Electrical duct heater

Duct heater with spigot connection for standard spiral circular ducts. Manufactured from Aluzinc-coated sheet steel with a heating element in stainless steel. The CB heater has rubber seals on the connecting spigots.

The heater has double integral overheating protection: one with automatic and one with manual reset. Suitable for control by room thermostat or Pulser regulator (additional accessories).

The minimum air volume is based on a minimum air velocity of 1.5 m/s. These duct heaters are designed for a maximum output air temperature of 50°C.

The CB can be installed in a horizontal or vertical position. In a horizontal position, the connection box should be installed facing upwards, or rotated 90° to one side. Installation with the connection box facing downwards is not allowed.

Parametri tecnici

Dati nominali
Voltaggio (nominale) 230 V
Tipo voltaggio AC
Frequenza 50 Hz
Fasi 1~
Potenza in entrata 3.000 W
Corrente in entrata 13 A
Portata aria min. 420 m³/h
Temperatura ambiente e canale
Temperatura ambiente consentita max 30 °C
Dimensioni e pesi
Dimensione condotto; Circolare, immissione 315 mm
Dimensione condotto; Circolare, espulsione 315 mm
Peso 5,4 kg
Altri
Condotto freddo/caldo Riscaldatore elettrico
Tipo connessione condotto Circolare
Images Dimensions - CB 315-3,0 230V/1 - Systemair
ø D = 315 mm
Pulser M - Systemair
Numero articolo: 5144
Pulser M

Termostato per Batteria elettrica monofase o bifase

.
DTV200 - Systemair
Numero articolo: 6261
DTV200

Pressostato differenziale 0-200 Pa IP54

.
DTV500A - Systemair
Numero articolo: 96807
DTV500A

Pressostato differenziale 0-500 Pa IP54

.