Batteria elettrica circolari
Numero articolo: 5291
Electrical duct heater
Duct heater with spigot connection for standard spiral circular ducts. Manufactured from Aluzinc-coated sheet steel with a heating element in stainless steel. The CB heater has rubber seals on the connecting spigots.
The heater has double integral overheating protection: one with automatic and one with manual reset. Suitable for control by room thermostat or Pulser regulator (additional accessories).
The minimum air volume is based on a minimum air velocity of 1.5 m/s. These duct heaters are designed for a maximum output air temperature of 50°C.
The CB can be installed in a horizontal or vertical position. In a horizontal position, the connection box should be installed facing upwards, or rotated 90° to one side. Installation with the connection box facing downwards is not allowed.
Dati nominali | ||
---|---|---|
Voltaggio (nominale) | 230 | V |
Tipo voltaggio | AC | |
Frequenza | 50 | Hz |
Fasi | 1~ | |
Potenza in entrata | 1.200 | W |
Corrente in entrata | 5,2 | A |
Portata aria | min. 108 | m³/h |
Temperatura ambiente e canale | ||
---|---|---|
Temperatura ambiente consentita | max 30 | °C |
Dimensioni e pesi | ||
---|---|---|
Dimensione condotto; Circolare, immissione | 160 | mm |
Dimensione condotto; Circolare, espulsione | 160 | mm |
Peso | 3 | kg |
Altri | ||
---|---|---|
Condotto freddo/caldo | Riscaldatore elettrico | |
Tipo connessione condotto | Circolare |
ø D = | 160 mm |