CB 100-0,6 230V/1
Batteria elettrica circolari
Numero articolo: 5376
Electrical duct heater
Duct heater with spigot connection for standard spiral circular ducts. Manufactured from Aluzinc-coated sheet steel with a heating element in stainless steel. The CB heater has rubber seals on the connecting spigots.
The heater has double integral overheating protection: one with automatic and one with manual reset. Suitable for control by room thermostat or Pulser regulator (additional accessories).
The minimum air volume is based on a minimum air velocity of 1.5 m/s. These duct heaters are designed for a maximum output air temperature of 50°C.
The CB can be installed in a horizontal or vertical position. In a horizontal position, the connection box should be installed facing upwards, or rotated 90° to one side. Installation with the connection box facing downwards is not allowed.
Parametri tecnici
| Dati nominali | ||
|---|---|---|
| Voltaggio (nominale) | 230 | V |
| Fasi | 1~ | |
| Potenza in entrata | 600 | W |
| Corrente in entrata | 2,6 | A |
| Portata aria | min. 45 | m³/h |
| Temperatura ambiente e canale | ||
|---|---|---|
| Temperatura ambiente consentita | max 30 | °C |
| Dimensioni e pesi | ||
|---|---|---|
| Dimensione condotto; Circolare, immissione | 100 | mm |
| Dimensione condotto; Circolare, espulsione | 100 | mm |
| Peso | 2,1 | kg |
| Altri | ||
|---|---|---|
| Condotto freddo/caldo | Riscaldatore elettrico | |
| Tipo connessione condotto | Circolare |
| ø D = | 100 mm |
