N° article: 235443
All MUB/T fans have impellers with backward curved blades, manufactured from aluminium, and IEC standard motors outside the air stream for all 400V three phase motors from 0.75 kW. The MUB/T fans are suitable for medium temperatures up to 120°C continuously. Motor protection by cold conductors (PTC), to be connected to an external motor protection device.
The casing consists of an aluminium frame with fibreglass reinforced plastic corners and double skin, galvanised steel panels with a 30 mm mineral wool insulation. Panels are removable, allowing flexible ventilation solutions - the air direction can easily be changed. With quick lock access door. The MUB/T bottom panel is shaped as a condensate tray and incorporates a pre-mounted 1" drain plug (MUB/T 100 630D4-K2-L has no drain plug). An isolator switch is mounted on the casing.
Several filter modules like f.e. activated carbon- or aluminum filters are available, calculated individually on the working point.
Données nominales | ||
---|---|---|
Tension (nominale) | 400 | V |
Fréquence | 50 | Hz |
Phases | 3~ | |
Puissance installée | 2 469 | W |
Intensité | 4,48 | A |
Vitesse de rotation | 1 459 | tr/min |
Débit d'air | max 11 988 | m³/h |
Température air en mouvement | max 120 | °C |
Temp. max. avec variateur | 120 | °C |
Protection/Classification | ||
---|---|---|
Indice de protection, moteur | IP55 | |
Classe d'isolation | F |
Dimensions et poids | ||
---|---|---|
Poids | 103,5 | kg |
Autres | ||
---|---|---|
Type de moteur | AC |
The Level of Casing-Breakout-Noise depends on the quality of shielding the acoustic inlet and outlet noises.
The shown Level of Casing-Breakout-Noise will be reached only in case of 100 % shielding the acoustic inlet and outlet noise and a correspondingly low environment noise.
MUB/T 062 | □A | □B | □C | □D | E |
500/560/630 |
820 |
820 |
720 |
678 |
21 |