Boitier de protection thermique monophasé 10A
N° article: 161199
Thermal contact motor protection
The S-ET 10 (for wall mounting) or S-ET 10E (for mounting on a top rail) switch off the supply voltage to the motor when the thermal contact in the motor windings is tripped. The motor protector is connected to a 230V supply and also to the thermal contact in the motor.
The motor protector is reset by pressing the black button as soon as the motor windings have cooled sufficiently. The motor protector can also be used in conjunction with a transformer.
Manually turn on and off with connected motors possible.The S-ET has an alarm contact as an accessory. The alarm contact has a built-in potential-free contact for an external signal to indicate when the contact relay has been tripped.
Données nominales | ||
---|---|---|
Tension (nominale) | 230 | V |
Fréquence | 50; 60 | Hz |
Phases | 1~ | |
Intensité | 0,4 à 10 | A |
Protection/Classification | ||
---|---|---|
Indice de protection | IP55 |
Plage de température, ambiante et conduit | ||
---|---|---|
Température ambiante | -25 à 40 | °C |
Dimensions et poids | ||
---|---|---|
Profondeur | 97 | mm |
Hauteur | 135 | mm |
Largeur | 80 | mm |
Poids | 0,45 | kg |
Motor protection switch for motors with lead out thermal contacts. Automatic cut out of motor when thermal contact trips (motor overheating). Reset by pressing the black button as soon as the motor windings have cooled sufficiently.
Automatic restart after power failure. Can also be used in conjunction with a transformer. An alarm contact is available as an accessory. The alarm contact has an integral potential-free contact producing an external signal when the relay has been tripped.
For wall installation.
Nom du document | Type de document | |
---|---|---|
L-BAL-E308-D-GB-F-S.PDF | Notice | |
EU Declaration of conformity_004 | Déclaration |