EC Control - Humidité
Controleur d'ambiance - Humidité 0-100% - 230V
N° article: 24807
• Simple to install, connect and set up
• 50/60HZ mains option
• Can be used with all 220V single phase and 380V three phase EC fans
• Built in sensor
• Conforms to CE standards EN 60730-1, EN 61000-6-3, EN 61000-6-1
• Demand control made simple
The controller compares room humidity with an adjustable set point (SW1) and regulates a 0..10 V output signal applied to a ventilator with a proportional algorithm in direct or reverse action based on jumper JP1 setting:
JP1 closed 1-2 = reverse action
JP1 closed 2-3 = direct action
Paramètres techniques
| Données nominales | ||
|---|---|---|
| Tension (nominale) | 265 | V |
| Tension | 85 à 265 | V |
| Fréquence | 50; 60 | Hz |
| Puissance installée | 0 | W |
| Température | -20 à 50 | °C |
| Protection/Classification | ||
|---|---|---|
| Indice de protection | IP30 |
| Régulations et sondes | ||
|---|---|---|
| Mesure humidité | 0 à 100 | %RH |
| Dimensions et poids | ||
|---|---|---|
| Poids | 0,137 | kg |
