AQUA 24TF
N° article: 5136
Temperature controller
AQUA 24TF with room or supply air temperature control. The AQUA 24TF controls three-point actuators with a puls-pause signal where the ratio between on-time and off-time is proportional to the temperature offset. The controller has built-in sensor, external sensor can be connected. Use surface sensor TG-A 130 when frost protection or shut-down function is required. AQUA 24TF is suitable for control of valve actuator RVAZ4 24.
Cascade factor (CF) must be set to 1 for single sensor control. Minimum limit (Min) not active in single sensor control.
Paramètres techniques
| Données nominales | ||
|---|---|---|
| Fréquence | 50; 60 | Hz |
| Ajustement température | 0 à 30 | °C |
| Protection/Classification | ||
|---|---|---|
| Indice de protection | IP20 |
| Régulations et sondes | ||
|---|---|---|
| Humidité relative autorisé sans condensation | 0 à 90 | %RH |
| Plage de température, ambiante et conduit | ||
|---|---|---|
| Température ambiante | 0 à 50 | °C |
| Dimensions et poids | ||
|---|---|---|
| Profondeur | 45 | mm |
| Hauteur | 150 | mm |
| Largeur | 92 | mm |
| Poids | 0,2 | kg |
| Autres | ||
|---|---|---|
| Cascade facteur (CF) | 1 à 15 | |
| Puissance de sortie | 5 | VA |
| Nom du document | Type de document | |
|---|---|---|
| AQUA24TF_GB.pdf | Brochure | |
| AQUA24TF_I.PDF | Notice | |
| EC_AQUA-RANGE.pdf | Déclaration |
