FR 100 Vent en linea circ

Item number: 411330

Aplicación

La serie FR ha sido diseñada para su instalación en conductos circulares. Estos modelos pueden usarse para varios puntos de escape, aplicaciones residenciales y comerciales, ventilación de semisótano o suministro de aire renovado.

Diseño

Todos los modelos (excepto FR 200, FR 225 y FR250) cuentan con una carcasa de plástico unida y sellada permanentemente. La carcasa está unida por medio de un proceso de soldadura por vibración. El proceso emplea movimiento transversal y recíproco en el punto de contacto entre las piezas de entrada y salida de la carcasa. La fricción produce un calor, que funde el material termoplástico en la interfaz. El material fundido se vuelve a solidificar rápidamente, lo que resulta en una carcasa fusionada de una sola pieza. El borde fundido es inherentemente hermético, muy sólido y permanente. No se utilizan tornillos ni adhesivos para unir las piezas de la carcasa. Un ventilador hermético, asegura que no se pierda eficiencia y que no se viertan contaminantes debido a alguna fuga.

El ventilador puede ser montado al exterior y en lugares húmedos. La serie FR cuenta con motores de rotor externo, que han demostrado ser confiables año tras año. Se ha diseñado una gran caja de cableado eléctrico dentro de la carcasa del ventilador, lo que facilita la instalación eléctrica.

Control de velocidad

Los ventiladores pueden ser controlados por medio de un controlador de velocidad de estado sólido.

Protección del motor

Para evitar que el motor se sobrecaliente el ventilador está protegido de la impedancia.

Parametros tecnicos

Datos nominales
Voltage (nominal)	115	V
Frecuencia	60	Hz
Fase(s)	1~
Potencia de entrada	20	W
Corriente de entrada	0.17	A
Revoluciones por minuto	1,833	rpm
Caudal de aire	máximo 151	cfm
Temperatura del aire transportado	máximo 60	°C

Proteccion/Clasificacion
Grado de proteccion ,motor	IP44
Clase de aislamiento	B

Dimensiones y pesos
Dimension del conducto; Circular, interior	4	in.
Dimension del conducto; Circular, interior	100	mm
Dimension del conducto; Circular, exterior	4	in.
Dimension del conducto; Circular, exterior	100	mm
Peso	1.95	kg

Otros
Tipo de conexión de conducto	Circular

CFM Table
Model	0.0" Ps	0.2" Ps	0.4" Ps	0.6" Ps	0.8" Ps	1.0" Ps	1.5" Ps
FR 100	151	123	94	63	20	-	-
FR 110	187	168	150	128	112	95	50
FR 125	172	139	98	63	15	-	-
FR 140	226	203	174	138	104	55	-
FR 150	327	287	247	200	163	118	37
FR 160	345	298	252	197	157	135	110

HVI Certified Rating(s)

Static Pressure

(In. Wg.)

Rated Airflow

(CFM)

Rated Power

(Watts)

0.20

120

Modelo	A	B	C	D	E
FR 100	3 31/32 (110.5)	4 31/32 (126.5)	10 (256)	1 (25)	10 9/16 (268)
FR 110	3 31/32 (110.5)	4 31/32 (126.5)	10 (256)	1 (25)	10 9/16 (268)
Todas las dimensiones en mm.

FR 100 Vent en linea circ, FR 100 Vent en linea circ

GUIDE SPECIFICATION
Specifier Notes: This guide specification is written in Construction Specifications Institute (CSI) 3-Part Format in accordance with The CSI Construction Specifications Practice Guide, MasterFormat, SectionFormat, and PageFormat. 
Specifier Notes: This Section must be carefully reviewed and edited by the Architect or Engineer to meet the requirements of the Project and local building code.  Coordinate this Section with Division 01, other specification sections, and the Drawings.  Delete all Specifier Notes after editing this Section.
Section numbers and titles are based on MasterFormat 2014 Update. 
SECTION 23 34 00
HVAC FANS
Specifier Notes:  This Section covers Fantech FR Series circular inline duct fans with alternating current (AC) motors. Consult Fantech for assistance in editing this Section as required for the Project.  
PART 1. GENERAL
1.1	SECTION INCLUDES
        A.     Circular inline duct fans with alternating current (AC) motors. 
1.2	RELATED REQUIREMENTS
Specifier Notes:  Edit the following list of related sections as required for the Project.  Limit the list to sections with specific information that the reader might expect to find in this Section, but is specified elsewhere.
        A.	Section 23 31 00 – HVAC Ducts and Casings.
        B.	Section 26 05 00 – Common Work Results for Electrical.
1.3	REFERENCE STANDARDS
Specifier Notes:  List reference standards used elsewhere in this Section, complete with designations and titles.  Delete reference standards from the following list not used in the edited Section.
        A.	Home Ventilation Institute (HVI) (https://www.hvi.org/hvi-certified-products-directory/):
                1.	HVI 916 – Listed and Tested Accordingly 
        B.	Underwriting Laboratory (UL) (https://productiq.ulprospector.com/en):
                1.	UL 507- Electric Fans
                2.	CSA 22.2 No 113- Fans and Ventilators 
1.4	PREINSTALLATION MEETINGS
Specifier Notes:  Edit the Preinstallation Meetings article as required for the Project.  Delete article if not required.
        A.	Convene preinstallation meeting [1 week] [2 weeks] before start of Work of this Section.
        B.	Require attendance of parties directly affecting Work of this Section, including Contractor, Architect, installer, and manufacturer’s representative.
        C.	Review the Following:
                1.	Materials
                2.	Installation
                3.	Adjusting
                4.	Protection
                5.	Coordination with other Work
1.5 SUBMITTALS
Specifier Notes:  Edit the Submittals article as required for the Project. Delete submittals not required.
        A.	Comply with Division 01.
        B.	Product Data:  Submit manufacturer’s product data, including installation instructions.
        C.	Shop Drawings:  Submit manufacturer’s shop drawings, including plans, elevations, sections, and details.  
                1.	Wiring Diagrams:  Indicate wiring for each item of equipment and interconnections between items of equipment.
                2.	Include manufacturer’s names, model numbers, ratings, power requirements, equipment layout, device arrangement, complete wiring point-to-point diagrams, and conduit layouts.
        D.	Manufacturer’s Certification:  Submit manufacturer’s certification that materials comply with specified requirements and are suitable for intended application.
        E.	Operation and Maintenance Data:
                1.	Submit manufacturer’s operation and maintenance manual; including the following:
                        a.	Operation, maintenance, adjustment, and cleaning instructions.
                        b.	Troubleshooting guide
                        c.	Parts list
                        d.	Electrical wiring diagrams if required.
                2.	Provide detailed information required for Owner to properly operate and maintain equipment.
        F.	Warranty Documentation:  Submit manufacturer’s standard warranty.
1.6 QUALITY ASSURANCE
        A.     Manufacturer’s Qualifications:  Manufacturer regularly engaged in the manufacturing of circular inline duct fans to that specified for a minimum of 10 years.
        B.     Installer's Qualifications:
         	1.     Installer regularly engaged in installation of circular inline duct fans of similar type to that specified for a minimum of 5 years.
            	2.     Use persons trained for installation of circular inline duct fans.
1.7 DELIVERY, STORAGE, AND HANDLING
      A.     Delivery Requirements:  Deliver materials to site in manufacturer’s original, unopened containers and packaging, with labels clearly identifying product name and manufacturer.
      B.     Storage and Handling Requirements:
        	1.     Store and handle materials in accordance with manufacturer’s instructions.
           	2.     Keep materials in manufacturer’s original, unopened containers and packaging until installation.
            	3.     Store materials in clean, dry area indoors.
            	4.     Keep materials from freezing.
            	5.     Protect materials during storage, handling, and installation to prevent damage.
1.8 WARRANTY
Warranty Period:  5 years
PART 2. PRODUCTS
2.1 MANUFACTURERS
        A.     Manufacturer:  Fantech Inc., 10048 Industrial Blvd., Lenexa, Kansas 66215.  Phone 800-747-6217.  www.fantech.net.  ussupport@fantech.net. 
 Specifier Notes:  Specify if substitutions will be permitted.
        B.	Substitutions: [Not permitted] [Comply with Division 01].
        C.	Single Source:  Provide materials from single manufacturer.
2.2 HVAC FANS
        A.     Circular inline duct fans with alternating current (AC) motors: FR Series
                1.	cULus Listed
                        a.	Additional Evaluation(s): Outdoor Use
                2.	ENERGY STAR© Rated
                3.	HVI 916  
Specifier Notes:  Specify circular inline duct fan models as required for the Project. Delete models not required.
        B.	Model: “FR100”
                1.	Inlet Diameter:  4 inches
                2.	Outlet Diameter: 4 inches
                3.	Casing Diameter:  10 inches
                4.	Inlet and Outlet Connection Collars:  1 inch
                5.	Casing Material: Composite material with air-tight seam. Inlet and outlet halves are joined via a vibration welding process. A housing seam joined with screws or rivets is unacceptable.
                6.	Motor:  Alternating current external-rotor motor
                7.	Speed Control: by altering supply voltage via an external stepless controller
                8.	Motor Protection:  electronically protected 
                9.	Blades: Backward curved
              10. 	Voltage:  120 V
              11. 	Frequency:  50/60 Hz
              12. 	Nominal Voltage Range:  100 to 130 V
              13. 	Phase:  1
              14. 	Maximum Airflow:  151 cfm
              15. 	RPM:  1,833
              16. 	Power Rating, Motor:  20 W
              17. 	Current:  0.17 A
              18. 	Operational Temperature:  minus 13 to 140 degrees F
              19. 	Weight:  4.3 lbs
              20. 	Motor Insulation Class:  B
              21. 	Motor Enclosure Class:  IP44
        C.	Model: “FR125”
                1.	Inlet Diameter:  4 inches
                2.	Outlet Diameter: 5 inches
                3.	Casing Diameter:  10 inches
                4.	Inlet and Outlet Connection Collars:  1 inch
                5.	Casing Material: Composite material with air-tight seam. Inlet and outlet halves are joined via a vibration welding process. A housing seam joined with screws or rivets is unacceptable.
                6.	Motor:  Alternating current external-rotor motor
                7.	Speed Control: by altering supply voltage via an external stepless controller
                8.	Motor Protection:  electronically protected 
                9.	Blades: Backward curved
              10. 	Voltage:  120 V
              11. 	Frequency:  50/60 Hz
              12. 	Nominal Voltage Range:  100 to 130 V
              13. 	Phase:  1
              14. 	Maximum Airflow:  171 cfm
              15. 	RPM:  2,874
              16. 	Power Rating, Motor:  20 W
              17. 	Current:  0.17 A
              18. 	Operational Temperature:  minus 13 to 140 degrees F
              19. 	Weight:  3.3 lbs
              20.	Motor Insulation Class:  B
              21. 	Motor Enclosure Class:  IP44
        D.	Model: “FR150”
                1.	Inlet Diameter:  5-7/8 inches
                2.	Outlet Diameter: 5-7/8 inches
                3.	Casing Diameter:  11 1/2 inches
                4.	Inlet and Outlet Connection Collars:  1-1/4 inch
                5.	Casing Material: Composite material with air-tight seam. Inlet and outlet halves are joined via a vibration welding process. A housing seam joined with screws or rivets is unacceptable.
                6.	Motor:  Alternating current external-rotor motor
                7.	Speed Control: by altering supply voltage via an external stepless controller
                8.	Motor Protection: electronically protected 
                9.	Blades: Backward curved
              10. 	Voltage:  120 V
              11. 	Frequency:  50/60 Hz
              12. 	Nominal Voltage Range:  100 to 130 V
              13. 	Phase:  1
              14. 	Maximum Airflow:  324 cfm
              15. 	RPM:  2,630
              16. 	Power Rating, Motor:  68 W
              17. 	Current:  0.59 A
              18. 	Operational Temperature:  minus 13 to 140 degrees F
              19. 	Weight:  6 lbs
              20.	Motor Insulation Class:  B
              21. 	Motor Enclosure Class:  IP44
2.3 ACCESSORIES
        A.	Silencers for Circular Ducts
Specifier Notes:  Delete accessories not required.
                1.	Model: [“LD 4”] [“LD 5”] [“LD 6”] 
                2.	Insulation Thickness: 2 inches.
        B.	Mounting Clamps for Circular Ducts
Specifier Notes:  Delete accessories not required.
                1.	Model: [“FC 4”] [“FC 5”] [“FC 6”] 
                2.	Material: Galvanized sheet metal with 1/3 inch neoprene lining
                3.	Width: 2-1/3 inches
                4.	Clamps Together: 2 screws
                5.	Quantity: 2 pcs per kit
        C.	External Remotely Mounted Speed Controller 
Specifier Notes:  Delete if not required.
                1.	Model: WC15 
                2.	Remotely mounted manual-speed control for air flow adjustments and balancing. 
                3.	Voltage: 120V
                4.	Amperage: 5A max
                5.	Enclosure class: IP54
        D.	Inlet Safety Guard
Specifier Notes:  Delete if not required.
                1.	Model: [“IG 4”] [“IG 5”] [“IG 6”] 
                2.	Wire ring inlet guard prevents foreign objects from entering inline duct fan Zinc chromate plated steel. 
PART 3. EXECUTION
3.1 EXAMINATION
        A.     Examine areas to receive circular inline duct fans.
        B.     Notify Architect of conditions that would adversely affect installation or subsequent use.
        C.     Do not begin installation until unacceptable conditions are corrected.
3.2 INSTALLATION
        A.     Install circular inline duct fans in accordance with manufacturer’s instructions at locations indicated on the Drawings.
        B.     Attach duct work to inlet and outlet connection collars of circular inline duct fans in accordance with manufacturer’s instructions.
        C.     Electrical:  Install electrical power to circular inline duct fans as specified in Section 26 05 00. 
3.3 ADJUSTING
        A.     Adjust circular inline duct fans for proper operation in accordance with manufacturer’s instructions.
3.4 PROTECTION
        A.     Protect installed circular inline duct fans from damage during construction.
END OF SECTION

Parametros tecnicos:

Datos nominales
Voltage (nominal): 115V
Frecuencia: 60Hz
Fase(s): 1~
Potencia de entrada: 20W
Corriente de entrada: 0.17A
Revoluciones por minuto: 1,833rpm
Caudal de aire: máximo 151cfm
Temperatura del aire transportado: máximo 60°C
Proteccion/Clasificacion
Grado de proteccion ,motor: IP44
Clase de aislamiento: B
Dimensiones y pesos
Dimension del conducto; Circular, interior: 4in.
Dimension del conducto; Circular, interior: 100mm
Dimension del conducto; Circular, exterior: 4in.
Dimension del conducto; Circular, exterior: 100mm
Peso: 1.95kg
Otros
Tipo de conexión de conducto: Circular

Vendor Systemair
Article type FR 100 Vent en linea circ
Item number 411330

GUIDE SPECIFICATION

Specifier Notes: This guide specification is written in Construction Specifications Institute (CSI) 3-Part Format in accordance with The CSI Construction Specifications Practice Guide, MasterFormat, SectionFormat, and PageFormat.

Specifier Notes: This Section must be carefully reviewed and edited by the Architect or Engineer to meet the requirements of the Project and local building code. Coordinate this Section with Division 01, other specification sections, and the Drawings. Delete all Specifier Notes after editing this Section.

Section numbers and titles are based on MasterFormat 2014 Update.

SECTION 23 34 00

HVAC FANS

Specifier Notes: This Section covers Fantech FR Series circular inline duct fans with alternating current (AC) motors. Consult Fantech for assistance in editing this Section as required for the Project.

PART 1. GENERAL

1.1 SECTION INCLUDES

A. Circular inline duct fans with alternating current (AC) motors.

1.2 RELATED REQUIREMENTS

Specifier Notes: Edit the following list of related sections as required for the Project. Limit the list to sections with specific information that the reader might expect to find in this Section, but is specified elsewhere.

A. Section 23 31 00 – HVAC Ducts and Casings.

B. Section 26 05 00 – Common Work Results for Electrical.

1.3 REFERENCE STANDARDS

Specifier Notes: List reference standards used elsewhere in this Section, complete with designations and titles. Delete reference standards from the following list not used in the edited Section.

A. Home Ventilation Institute (HVI) (https://www.hvi.org/hvi-certified-products-directory/):

1. HVI 916 – Listed and Tested Accordingly

B. Underwriting Laboratory (UL) (https://productiq.ulprospector.com/en):

1. UL 507- Electric Fans

2. CSA 22.2 No 113- Fans and Ventilators

1.4 PREINSTALLATION MEETINGS

Specifier Notes: Edit the Preinstallation Meetings article as required for the Project. Delete article if not required.

A. Convene preinstallation meeting [1 week] [2 weeks] before start of Work of this Section.

B. Require attendance of parties directly affecting Work of this Section, including Contractor, Architect, installer, and manufacturer’s representative.

C. Review the Following:

1. Materials

2. Installation

3. Adjusting

4. Protection

5. Coordination with other Work

1.5 SUBMITTALS

Specifier Notes: Edit the Submittals article as required for the Project. Delete submittals not required.

A. Comply with Division 01.

B. Product Data: Submit manufacturer’s product data, including installation instructions.

C. Shop Drawings: Submit manufacturer’s shop drawings, including plans, elevations, sections, and details.

1. Wiring Diagrams: Indicate wiring for each item of equipment and interconnections between items of equipment.

2. Include manufacturer’s names, model numbers, ratings, power requirements, equipment layout, device arrangement, complete wiring point-to-point diagrams, and conduit layouts.

D. Manufacturer’s Certification: Submit manufacturer’s certification that materials comply with specified requirements and are suitable for intended application.

E. Operation and Maintenance Data:

1. Submit manufacturer’s operation and maintenance manual; including the following:

a. Operation, maintenance, adjustment, and cleaning instructions.

b. Troubleshooting guide

c. Parts list

d. Electrical wiring diagrams if required.

2. Provide detailed information required for Owner to properly operate and maintain equipment.

F. Warranty Documentation: Submit manufacturer’s standard warranty.

1.6 QUALITY ASSURANCE

A. Manufacturer’s Qualifications: Manufacturer regularly engaged in the manufacturing of circular inline duct fans to that specified for a minimum of 10 years.

B. Installer's Qualifications:

1. Installer regularly engaged in installation of circular inline duct fans of similar type to that specified for a minimum of 5 years.

2. Use persons trained for installation of circular inline duct fans.

1.7 DELIVERY, STORAGE, AND HANDLING

A. Delivery Requirements: Deliver materials to site in manufacturer’s original, unopened containers and packaging, with labels clearly identifying product name and manufacturer.

B. Storage and Handling Requirements:

1. Store and handle materials in accordance with manufacturer’s instructions.

2. Keep materials in manufacturer’s original, unopened containers and packaging until installation.

3. Store materials in clean, dry area indoors.

4. Keep materials from freezing.

5. Protect materials during storage, handling, and installation to prevent damage.

1.8 WARRANTY

Warranty Period: 5 years

PART 2. PRODUCTS

2.1 MANUFACTURERS

A. Manufacturer: Fantech Inc., 10048 Industrial Blvd., Lenexa, Kansas 66215. Phone 800-747-6217. www.fantech.net. ussupport@fantech.net.

Specifier Notes: Specify if substitutions will be permitted.

B. Substitutions: [Not permitted] [Comply with Division 01].

C. Single Source: Provide materials from single manufacturer.

2.2 HVAC FANS

A. Circular inline duct fans with alternating current (AC) motors: FR Series

1. cULus Listed

a. Additional Evaluation(s): Outdoor Use

2. ENERGY STAR© Rated

3. HVI 916

Specifier Notes: Specify circular inline duct fan models as required for the Project. Delete models not required.

B. Model: “FR100”

1. Inlet Diameter: 4 inches

2. Outlet Diameter: 4 inches

3. Casing Diameter: 10 inches

4. Inlet and Outlet Connection Collars: 1 inch

5. Casing Material: Composite material with air-tight seam. Inlet and outlet halves are joined via a vibration welding process. A housing seam joined with screws or rivets is unacceptable.

6. Motor: Alternating current external-rotor motor

7. Speed Control: by altering supply voltage via an external stepless controller

8. Motor Protection: electronically protected

9. Blades: Backward curved

10. Voltage: 120 V

11. Frequency: 50/60 Hz

12. Nominal Voltage Range: 100 to 130 V

13. Phase: 1

14. Maximum Airflow: 151 cfm

15. RPM: 1,833

16. Power Rating, Motor: 20 W

17. Current: 0.17 A

18. Operational Temperature: minus 13 to 140 degrees F

19. Weight: 4.3 lbs

20. Motor Insulation Class: B

21. Motor Enclosure Class: IP44

C. Model: “FR125”

1. Inlet Diameter: 4 inches

2. Outlet Diameter: 5 inches

3. Casing Diameter: 10 inches

4. Inlet and Outlet Connection Collars: 1 inch

5. Casing Material: Composite material with air-tight seam. Inlet and outlet halves are joined via a vibration welding process. A housing seam joined with screws or rivets is unacceptable.

6. Motor: Alternating current external-rotor motor

7. Speed Control: by altering supply voltage via an external stepless controller

8. Motor Protection: electronically protected

9. Blades: Backward curved

10. Voltage: 120 V

11. Frequency: 50/60 Hz

12. Nominal Voltage Range: 100 to 130 V

13. Phase: 1

14. Maximum Airflow: 171 cfm

15. RPM: 2,874

16. Power Rating, Motor: 20 W

17. Current: 0.17 A

18. Operational Temperature: minus 13 to 140 degrees F

19. Weight: 3.3 lbs

20. Motor Insulation Class: B

21. Motor Enclosure Class: IP44

D. Model: “FR150”

1. Inlet Diameter: 5-7/8 inches

2. Outlet Diameter: 5-7/8 inches

3. Casing Diameter: 11 1/2 inches

4. Inlet and Outlet Connection Collars: 1-1/4 inch

5. Casing Material: Composite material with air-tight seam. Inlet and outlet halves are joined via a vibration welding process. A housing seam joined with screws or rivets is unacceptable.

6. Motor: Alternating current external-rotor motor

7. Speed Control: by altering supply voltage via an external stepless controller

8. Motor Protection: electronically protected

9. Blades: Backward curved

10. Voltage: 120 V

11. Frequency: 50/60 Hz

12. Nominal Voltage Range: 100 to 130 V

13. Phase: 1

14. Maximum Airflow: 324 cfm

15. RPM: 2,630

16. Power Rating, Motor: 68 W

17. Current: 0.59 A

18. Operational Temperature: minus 13 to 140 degrees F

19. Weight: 6 lbs

20. Motor Insulation Class: B

21. Motor Enclosure Class: IP44

2.3 ACCESSORIES

A. Silencers for Circular Ducts

Specifier Notes: Delete accessories not required.

1. Model: [“LD 4”] [“LD 5”] [“LD 6”]

2. Insulation Thickness: 2 inches.

B. Mounting Clamps for Circular Ducts

Specifier Notes: Delete accessories not required.

1. Model: [“FC 4”] [“FC 5”] [“FC 6”]

2. Material: Galvanized sheet metal with 1/3 inch neoprene lining

3. Width: 2-1/3 inches

4. Clamps Together: 2 screws

5. Quantity: 2 pcs per kit

C. External Remotely Mounted Speed Controller

Specifier Notes: Delete if not required.

1. Model: WC15

2. Remotely mounted manual-speed control for air flow adjustments and balancing.

3. Voltage: 120V

4. Amperage: 5A max

5. Enclosure class: IP54

D. Inlet Safety Guard

Specifier Notes: Delete if not required.

1. Model: [“IG 4”] [“IG 5”] [“IG 6”]

2. Wire ring inlet guard prevents foreign objects from entering inline duct fan Zinc chromate plated steel.

PART 3. EXECUTION

3.1 EXAMINATION

A. Examine areas to receive circular inline duct fans.

B. Notify Architect of conditions that would adversely affect installation or subsequent use.

C. Do not begin installation until unacceptable conditions are corrected.

3.2 INSTALLATION

A. Install circular inline duct fans in accordance with manufacturer’s instructions at locations indicated on the Drawings.

B. Attach duct work to inlet and outlet connection collars of circular inline duct fans in accordance with manufacturer’s instructions.

C. Electrical: Install electrical power to circular inline duct fans as specified in Section 26 05 00.

3.3 ADJUSTING

A. Adjust circular inline duct fans for proper operation in accordance with manufacturer’s instructions.

3.4 PROTECTION

A. Protect installed circular inline duct fans from damage during construction.

END OF SECTION

Nombre documento	Tipo de documento
450371 FR Submittal Sheet EN.pdf	Catálogo
450418 FR Guide Spec EN.pdf	Catálogo
401444 FR OIPM EN FR ES.pdf	Manual
411330.dxf	CAD-file