Este producto está descatalogado

S-ET 10 Protección motor

Item number: 5154

Thermal contact motor protection

The S-ET 10 (for wall mounting) switch off the supply voltage to the motor when the thermal contact in the motor windings is tripped. The motor protector is connected to a 230V supply and also to the thermal contact in the motor. The motor protector is reset by pressing the black button as soon as the motor windings have cooled sufficiently. The motor protector can also be used in conjunction with a transformer. Manually turn on and off with connected motors possible. The S-ET has an alarm contact as an accessory. The alarm contact has a built-in potential-free contact for an external signal to indicate when the contact relay has been tripped.

Parametros tecnicos

Datos nominales
Tension nominal 60 Para 250 V
Intensidad 0,4 Para 10 A
Proteccion/Clasificacion
Grado de proteccion IP55
Controlador y sensores
Temperatura ambiente permitida -25 Para 40 °C
Dimensiones y pesos
Profundidad 80 mm
Altura 141 mm
Ancho 79 mm
Peso 0,45 kg

Motor protection switch for motors with lead out thermal contacts. Automatic cut out of motor when thermal contact trips (motor overheating). Reset by pressing the black button as soon as the motor windings have cooled sufficiently. Automatic restart after power failure. Can also be used in conjunction with a transformer. An alarm contact is available as an accessory. The alarm contact has an integral potential-free contact producing an external signal when the relay has been tripped.

 

For wall installation.