Item number: 24806
• Simple to install, connect and set up
• 50/60HZ mains option
• Can be used with all 220V single phase and 380V three phase EC fans
• Can accept 0-10V input from any control sensor or BMS
• Conforms to CE standards EN 60730-1, EN 61000-6-3, EN 61000-6-1
• Demand control made simple
The controller compares input signal with an adjustable set point and regulates a 0..10 V output signal applied to a ventilator with a PI algorithm in direct or reverse action based on jumper JP1 setting:
JP1 closed 1-2 = reverse action
JP1 closed 2-3 = direct action
Datos nominales | ||
---|---|---|
Voltage (nominal) | 265 | V |
Tension nominal | 85 Para 265 | V |
Frecuencia | 50; 60 | Hz |
Potencia de entrada | 0 | W |
Temperatura | -20 Para 50 | °C |
Proteccion/Clasificacion | ||
---|---|---|
Grado de proteccion | IP30 |
Controlador y sensores | ||
---|---|---|
Rango de trabajo | 0...100% |
Dimensiones y pesos | ||
---|---|---|
Peso | 0,135 | kg |