Item number: 5383
Electrical duct heater
Duct heater with spigot connection for standard spiral ducts. Manufactured from Aluzinc-coated sheet steel with a heating element in stainless steel. The heater has integral overheating protection with a manual reset function. The CB heater has rubber seals on the connecting spigots. Suitable for control by room thermostat or Pulser. The minimum air volume is based on a minimum air velocity of 1.5 m/s. These duct heaters are designed for a maximum output air temperature of 50°C. The CB can be installed in a horizontal or vertical duct. In a horizontal duct, the connection box should be installed facing upwards, or rotated 90° to one side. Installation with the connection box facing downwards is not allowed.
Datos nominales | ||
---|---|---|
Voltage (nominal) | 400 | V |
Fase(s) | 2~ | |
Potencia de entrada | 5.000 | W |
Corriente de entrada | 12,5 | A |
Caudal de aire | 115 | m³/h |
Controlador y sensores | ||
---|---|---|
Temperatura ambiente permitida | máximo 30 | °C |
Dimensiones y pesos | ||
---|---|---|
Dimension del conducto; Circular, interior | 160 | mm |
Dimension del conducto; Circular, exterior | 160 | mm |
Peso | 4 | kg |
Otros | ||
---|---|---|
Conducto frio/calor | Calentador eléctrico | |
Tipo de conexión de conducto | Circular |
A | = | Heating elements |
B |
= |
Over heat protection with automatic reset |
C |
= |
Over heat protection with manual reset |
E |
= |
Interlocking |
F |
= |
All phase breaker |
H |
= |
Thyristor type Pulser or TTC |
ø D = | 160 mm |