AQUA 24TF Heat Regulator
Art. no.: 5136
Temperature controller
AQUA 24TF with room or supply air temperature control. The AQUA 24TF controls three-point actuators with a puls-pause signal where the ratio between on-time and off-time is proportional to the temperature offset. The controller has built-in sensor, external sensor can be connected. Use surface sensor TG-A 130 when frost protection or shut-down function is required. AQUA 24TF is suitable for control of valve actuator RVAZ4 24.
Cascade factor (CF) must be set to 1 for single sensor control. Minimum limit (Min) not active in single sensor control.
Technical parameters
| Nominal data | ||
|---|---|---|
| Frequency | 50; 60 | Hz |
| Temperature adjustment | 0 to 30 | °C |
| Protection/Classification | ||
|---|---|---|
| Enclosure class | IP20 |
| Controller and Sensors | ||
|---|---|---|
| Permitted humidity, non-condensing | 0 to 90 | %RH |
| Ambient and duct temperature | ||
|---|---|---|
| Permitted ambient temperature | 0 to 50 | °C |
| Dimensions and weights | ||
|---|---|---|
| Depth | 45 | mm |
| Height | 150 | mm |
| Width | 92 | mm |
| Weight | 0.2 | kg |
| Others | ||
|---|---|---|
| Cascade factor (CF) | 1 to 15 | |
| Apparent power | 5 | VA |
| Document filename | Document filetype | |
|---|---|---|
| AQUA24TF_GB.pdf | Brochure | |
| AQUA24TF_I.PDF | Manual | |
| EC_AQUA-RANGE.pdf | Declaration |
