PH Topvex 9kW 400
Art. no.: 235132
A pre-heater is available as an accessory for Topvex units of model SC20-70 and TC20-70 with counterflow heat exchanger. The pre-heater can be used to lift the inlet temperature into the air handling unit. The pre-heater will act with supporting capacity during conditions as by pass defrosting or during low outdoor temperatures, to secure desired supply temperature.
The pre-heater is controlled from the integrated control system in the Topvex unit, Systemair Access, with a dedicated pre-heater function offering set point to actual needs.
Technical parameters
| Nominal data | ||
|---|---|---|
| Voltage (nominal) | 400 | V |
| Voltage type | AC | |
| Frequency | 50 | Hz |
| Phases | 3~ | |
| Input power | 9,000 | W |
| Air flow | min. 678 | m³/h |
| Ambient and duct temperature | ||
|---|---|---|
| Permitted ambient temperature | max 30 | °C |
| Dimensions and weights | ||
|---|---|---|
| Duct dimension; Circular, inlet | 400 | mm |
| Duct dimension; Circular, outlet | 400 | mm |
| Weight | 9.05 | kg |
| Others | ||
|---|---|---|
| Duct cooler/heater | Electric heater | |
| Duct connection type | Circular |
| ø D = | 400 mm |