Art. no.: 235133
A pre-heater is available as an accessory for Topvex units of model SC20-70 and TC20-70 with counterflow heat exchanger. The pre-heater can be used to lift the inlet temperature into the air handling unit. The pre-heater will act with supporting capacity during conditions as by pass defrosting or during low outdoor temperatures, to secure desired supply temperature.
The pre-heater is controlled from the integrated control system in the Topvex unit, Systemair Access, with a dedicated pre-heater function offering set point to actual needs.
Nominal data | ||
---|---|---|
Voltage (nominal) | 400 | V |
Voltage type | AC | |
Frequency | 50 | Hz |
Phases | 3~ | |
Input power | 12,000 | W |
Input current | 17.3 | A |
Air flow | 1,080 to 7,200 | m³/h |
Ambient and duct temperature | ||
---|---|---|
Permitted ambient temperature | max 30 | °C |
Dimensions and weights | ||
---|---|---|
Duct dimension, inlet (height x width) | 400 x 500 | mm |
Duct dimension, outlet (height x width) | 400 x 500 | mm |
Weight | 23.45 | kg |
Others | ||
---|---|---|
Duct cooler/heater | Electric heater | |
Duct connection type | Rectangular |
B |
H |
D |
500 |
400 |
500 |