Art. no.: 13891
Language independent
Simple configuration via the backlit display
Input for an external set point device
Optigo 5 is a pre-programmed, configurable controller for DIN-mounting that is intended to control temperature, CO2, pressure, humidity and domestic hot water in HVAC applications. The controller is extremely easy to install and use. It is mainly intended for small applications. Optigo has a knob with an encoder which makes the menu system very easy to use. You can read and set values shown in the back-lit display. A value is approved by pressing the knob. Optigo is suitable for DIN-rail or cabinet mounting. Since the terminals are detachable all connections can be made before Optigo is installed.
Number of inputs / outputs OP5:
1 analogue input, PT1000
1 SPI input for external set-point device
1 universal input, PT1000 or digital
1 digital input
2 analogue outputs, 0...10V DC
Nominal data | ||
---|---|---|
Voltage (nominal) | 24 | V |
Frequency | 50; 60 | Hz |
Input power | 3 | W |
Protection/Classification | ||
---|---|---|
Enclosure class | IP20 |
Controller and Sensors | ||
---|---|---|
Permitted ambient humidity | max 90 | %RH |
Ambient and duct temperature | ||
---|---|---|
Permitted ambient temperature | 0 to 50 | °C |
Dimensions and weights | ||
---|---|---|
Weight | 0.3 | kg |