Optigo OP 10
Art. no.: 7282
OP10 has 10 inputs/outputs and can be configured to control Temperature (ventilation control with heating and cooling), Water-heated radiator heating with outdoor temperature dependent control-curve or Domestic hot-water control.
The controller is extremely easy to install and use. It is mainly intended for small applications. Optigo has a knob with an encoder which makes the menu system very easy to use. You can read and set values shown in the back-lit display. A value is approved by pressing the knob. Optigo is suitable for DIN-rail or cabinet mounting. Since the terminals are detachable all connections can be made before Optigo is installed.
OP 10 is available in two versions, OP10 with 24 V AC supply voltage and OP 10-230 with 230 V AC supply voltage.
Number of inputs / outputs OP10
AI 2
DI 2
UI 1
AO 2
DO 3
Technical parameters
| Nominal data | ||
|---|---|---|
| Voltage (nominal) | 24 | V |
| Frequency | 50; 60 | Hz |
| Input power | 6 | W |
| Protection/Classification | ||
|---|---|---|
| Enclosure class | IP20 |
| Controller and Sensors | ||
|---|---|---|
| Permitted ambient humidity | max 90 | %RH |
| Ambient and duct temperature | ||
|---|---|---|
| Permitted ambient temperature | 0 to 50 | °C |
| Dimensions and weights | ||
|---|---|---|
| Weight | 0.3 | kg |
