Optigo OP 10-230

Art. no.: 7283

OP10 has 10 inputs/outputs and can be configured to control Temperature (ventilation control with heating and cooling), Water-heated radiator heating with outdoor temperature dependent control-curve or Domestic hot-water control. 

The controller is extremely easy to install and use. It is mainly intended for small applications. Optigo has a knob with an encoder which makes the menu system very easy to use. You can read and set values shown in the back-lit display. A value is approved by pressing the knob. Optigo is suitable for DIN-rail or cabinet mounting. Since the terminals are detachable all connections can be made before Optigo is installed.

OP 10 is available in two versions, OP10 with 24 V AC supply voltage and OP 10-230 with 230 V AC supply voltage.

Number of inputs / outputs OP10

AI      2

DI      2

UI      1

AO     2

DO     3

Technical parameters

Nominal data
Voltage (nominal) 230 V
Voltage type AC
Protection/Classification
Enclosure class IP20
Controller and Sensors
Permitted ambient humidity max 90 %RH
Ambient and duct temperature
Permitted ambient temperature -40 to 50 °C
Dimensions and weights
Weight 0.3 kg
Others
Apparent power 4 VA
Images Dimensions - Optigo OP 10-230 - Systemair
TG-A1/PT1000 Surface sensor - Systemair
Art. no.: 7284
TG-A1/PT1000 Surface sensor

.

.
TG-K3/PT1000 Duct sensor - Systemair
Art. no.: 7287
TG-K3/PT1000 Duct sensor .
TG-R5/PT1000 Room sensor 0-50° - Systemair
Art. no.: 5404
TG-R5/PT1000 Room sensor 0-50° .
TG-UH3/PT1000 Wall sensor - Systemair
Art. no.: 35203
TG-UH3/PT1000 Wall sensor

35203 TG-UH3/PT1000 Wall sensor

.
TG-D1/PT1000 Immersion sensor - Systemair
Art. no.: 6773
TG-D1/PT1000 Immersion sensor

temperature range: 0-30°C

.
TG-KH/PT1000 Duct sensor - Systemair
Art. no.: 202705
TG-KH/PT1000 Duct sensor

temperature range: -30° - +70°C

.