CBMF 315-9,0 400V/3 Duct heate
Art. no.: 12354
Duct heater with integral control equipment
Duct heater with spigot connection for standard spiral circular ducts. Manufactured from Aluzinc-coated sheet steel with a heating element in stainless steel. The CBMF has rubber seals on the connecting spigots.
The temperature is set on the cover of the duct heater. The heater has double integral overheating protection: one with automatic and one with manual reset. The unit is controlled by an integral electronic temperature regulator, using so-called time-proportional Pulse/Pause technology. This provides extremely precise temperature control. As a thyristor is used for adjusting the temperature, the unit has no moving parts. This means that it is silent and not susceptible to wear and tear. A pressure- and airflow guard that interlocks the heater is built into the terminal box.
The minimum air volume is based on a minimum air velocity of 1.5 m/s. These duct heaters are designed for a maximum output air temperature of 50°C.
The CB can be installed in a horizontal or vertical position. In a horizontal position, the connection box should be installed facing upwards, or rotated 90° to one side. Installation with the connection box facing downwards is not allowed.
All CBMFs are delivered with duct sensor TG-K330 (0-30°C) as standard.
Technical parameters
| Nominal data | ||
|---|---|---|
| Voltage (nominal) | 400 | V |
| Voltage type | AC | |
| Frequency | 50 | Hz |
| Phases | 3~ | |
| Input power | 9,000 | W |
| Input current | 13 | A |
| Air flow | min. 420 | m³/h |
| Ambient and duct temperature | ||
|---|---|---|
| Permitted ambient temperature | max 40 | °C |
| Dimensions and weights | ||
|---|---|---|
| Duct dimension; Circular, inlet | 315 | mm |
| Duct dimension; Circular, outlet | 315 | mm |
| Weight | 8 | kg |
| Others | ||
|---|---|---|
| Duct cooler/heater | Electric heater | |
| Duct connection type | Circular |
| ø D = | 315 |
