AQUA

AQUA is a linear slot diffuser for installation into the floor, intended for air supply in ventilation systems for swimming pools and wet spaces with large windows or glass walls. AQUA helps protecting the glass surfaces from condensation of water.

• Modern slim and compact design

• Low noise at sufficiently high air discharge velocity

• Homogenous discharge pattern on the whole diffuser length

• Single diffuser segments of various lengths

• Segments with detachable slot dividing profiles and 90° angle segments available

• Installation in multiple diffuser segment arrays is possible

• Robust design enables walking on the installed diffuser

• Plenum boxes with bottom and side duct connection

• AQUA: Swimming pool slot diffuser

• AQUA-DE: Swimming pool slot diffuser with detachable front slot dividing profiles. It is intended for cleaning of the air channel built by the diffuser consoles. The front slot dividing profiles are laying loosely in the console framing, so they can be easily raised and detached. Only 2/3/4/5–slot elements with 1000 mm length are available.

• AQUA-CE: Corner element with 90° angle. It can be used as a functional element for air supply, though it cannot be combined with a plenum box.

- PB-AQUA-B & PB-AQUA-S: Plenum Boxes

- EC-AQUA: End Cap

- CP-HELLA: Connection Pins

- DN-AQUA: Drainage Nipple

- DP-AQUA: Drainage Plug

- LB-AQUA: Leveling Bridge

Diffuser AQUA consists of a pressure equalizing console from two main aluminium profiles. The profiles are connected by stainless steel thread bolts. The bolts also fix the aluminium profiles that separate the air discharge slots. The diffuser console is open on the bottom. Inside the consoles there are vertical deflectors, one per each 0,5 m of length. The deflectors help the air discharge pattern becoming homogenous and correctly oriented. The consoles can be connected into a multiple segment array by connection pins (accessory CP-HELLA). On both outermost ends of the array the end caps (accessory EC-AQUA) can be attached to the consoles. They avoid the fluid building materials (concrete, mortar...) from intruding into the diffuser console during installation and floor finishing. The plenum boxes PB-AQUA from stainless steel are available for installation with side or bottom duct connections.