Pulser M Temperature control

Art. no.: 5144

Variants

Electronic temperature control

The Pulser M is a single or two-phase temperature regulator for controlling heater batteries.

This device is connected in series between the mains and an electric heater. The Pulser M has an integral regulator with input terminals for a main sensor together with min. or max. limit sensors. The integral sensor can be used when regulating room temperature. The power regulation is completely stepless thanks to what is known as time-proportional control, which means that the relationship between the ‘on’ and ‘off’ times is determined by the set temperature requirement. The total ‘on’ and ‘off’ time, or pulse period, is approximately 1 minute.

Technical parameters

Nominal data
Voltage (nominal)	230	V
Frequency	50; 60	Hz
Phase(s)	1~
Input current	16	A
Temperature reduction at night	10	°C
Temperature adjustment	0 to 30	°C

Protection/Classification
Enclosure class	IP20

Controller and Sensors
Input power, heater	3.6	kW
Permitted ambient humidity	0 to 90	%RH
Permitted ambient temperature	0 to 30	°C

Dimensions and weights
Depth	43	mm
Height	150	mm
Width	94	mm
Weight	0.32	kg

Document filename	Document filetype
PULSER-M_DATASHEET_EN.PDF	Brochure
PULSER_M_IMO_multilingual.PDF	Manual
EC_PULSER_RANGE.pdf	Declaration

Art. no.: 5160

TG-K330 Duct Sensor 0-30°C

Art. no.: 5161

TG-K350 Duct Sensor 20-50°C

Art. no.: 4846

TG-K360 Duct sensor 0-60°C

Art. no.: 5162

TG-R430 Room sensor 0-30°C

Art. no.: 5163

TG-R530 Room sensor 0-30°C

Art. no.: 5174

TG-R600 External sensor

Art. no.: 5164

TG-R630 External sensor