Art. no.: 24806
• Simple to install, connect and set up
• 50/60HZ mains option
• Can be used with all 220V single phase and 380V three phase EC fans
• Can accept 0-10V input from any control sensor or BMS
• Conforms to CE standards EN 60730-1, EN 61000-6-3, EN 61000-6-1
• Demand control made simple
The controller compares input signal with an adjustable set point and regulates a 0..10 V output signal applied to a ventilator with a PI algorithm in direct or reverse action based on jumper JP1 setting:
JP1 closed 1-2 = reverse action
JP1 closed 2-3 = direct action
Nominal data | ||
---|---|---|
Voltage (nominal) | 265 | V |
Rated voltage | 85 to 265 | V |
Frequency | 50; 60 | Hz |
Input power | 0 | W |
Temperature | -20 to 50 | °C |
Protection/Classification | ||
---|---|---|
Enclosure class | IP30 |
Ambient and duct temperature | ||
---|---|---|
Working range | 0...100% |
Dimensions and weights | ||
---|---|---|
Weight | 0.135 | kg |