AXC 450-10-2 (B) (3,0kW)

Smoke extract axial fan AXC(B):

⁻ Certified according to EN 12101-3:2015 for 300°C/120 min.

⁻ CE mark of conformity by BSI.

⁻ Suitable for use inside or outside the fire zone. Temperature of medium for continuous operation from -20°C up to 55°C. Air direction from motor to impeller.

Impeller:

⁻ The adjustable blade angle allows flexible and exact adjustment to the desired working point with optimum efficiency.

⁻ Impellers with profiled blades made of cast aluminum alloy.

⁻ Dynamically balanced according to ISO 21940-11 and ISO 14694, balancing quality G6,3.

Casing:

⁻ Manufactured from hot-dip galvanized sheet steel according to ISO 1461.

⁻ Pre-drilled, rolled Eurovent 1/2 flanges pressed on both sides provide additional stability.

⁻ Pre-wired terminal box on fan casing for easy electrical connection, IP65 (IEC 60034-5).

⁻ PV version: Includes bolt-on outlet guide vanes which increases fan pressure and efficiency.

Motor:

⁻ Motor suitable for 300°C/120min or 55°C continuous operation.

⁻ High efficiency three-phase asynchronous motors with squirrel cage rotor, directly in the air stream.

⁻ Protection class IP55 (IEC 60034-5), insulation class H.

⁻ The motors can be equipped with PTC thermistors for motor protection (on request).

⁻ Single and two-speed motors are available.

⁻ Speed controllable via frequency converter, suitable for turn down to 10Hz.

The AXC(B) axial fans have been tested in Systemair’s AMCA accreditied Laboratory according to ISO 5801 and AMCA 210.