CBMF 100-0,6 230V/1 Duct heate
Item Number: 12241
Duct heater with integral control equipment
Duct heater with spigot connection for standard spiral circular ducts. Manufactured from Aluzinc-coated sheet steel with a heating element in stainless steel. The heater has integral overheating protection with a manual reset function. The CBMF have rubber seals on the connecting spigots. The temperature is set on the cover of the duct heater. The unit is controlled by an integral electronic temperature regulator, using so-called time-proportional Pulse/Pause technology. This provides extremely precise temperature control. As a thyristor is used for adjusting the temperature, the unit has no moving parts. This means that it is silent and not susceptible to wear and tear. A pressure- and airflow guard that interlocks the heater is built into the terminal box. The minimum air volume is based on a minimum air velocity of 1.5 m/s. These duct heaters are designed for a maximum output air temperature of 50°C.
All CBMFs are delivered with duct sensor TG-K330 (0-30°C) as standard.
Technical parameters
| Nominal data | ||
|---|---|---|
| Voltage (nominal) | 230 | V |
| Phase(s) | 1~ | |
| Input power | 600 | W |
| Input current | 2.6 | A |
| Air flow | min. 0.0125 | m³/s |
| Controller and Sensors | ||
|---|---|---|
| Permitted ambient temperature | max 40 | °C |
| Dimensions and weights | ||
|---|---|---|
| Duct dimension; Circular, inlet | 100 | mm |
| Duct dimension; Circular, outlet | 100 | mm |
| Weight | 2.3 | kg |
| Others | ||
|---|---|---|
| Duct cooler/heater | Electric heater | |
| Duct connection type | Circular |
| ø D = | 100 |