AXCBF-EX 250-6/28°-2 (0,37 kW)
Item Number: 33021
• Stock range, standart series short delivery time
• Aerofoil impeller with adjustable pitch angle
• Die cast aluminium hub and blades
• Casing, hot dip galvanized steel, to EN ISO 1641
• Aluminium anti-spark ring
• Spun flanges for high rigidity, to Eurovent standart
• Single and three phase motors, IP55, insulation
class F, in accordance with EN 60034, IEC 85.
• Admissible ambient temperatures from -20°C to
+40°C, other temperatures on request
• With motor outside the airstream
The Systemair AXCBF-EX range of bifurcated medium pressure axial fans has been developed for applications with an atmosphere which would either require special motors or reduce the lifetime of a standard motor. The Ex(d) motors of AXCBF-EX are out of the airstream. Available in sizes from 250 up to 800 mm impeller diameter. The stock range offers a standard selection with maximum airflow for the installed motor power. The fans could be used for zones 1 or 2, field of application II, for gases of groups A, B and C and for temperature classes T1 to T4. The fans are classified to category 2G. The fans are certified under the no Sira 07ATEX6341X. The Ex(d) motors are equipped with PTC thermistors for optimum motor protection. The motor is speed controllable by frequency converter. AXCBF-EX bifurcated axial fan casings are heavy gauge, hot dip galvanized, with spun flanges for high rigidity. The motor compartment allows easy access to the motor terminal box for wiring. Single or three phase B3 foot mounted motors, totally enclosed and fan cooled.
Technical parameters
| Nominal data | ||
|---|---|---|
| Voltage (nominal) | 415 | V |
| Frequency | 50 | Hz |
| Phase(s) | 3~ | |
| Input power | 224 | W |
| Input current | 0.691 | A |
| Impeller speed | 2,958 | rpm |
| Air flow | max 0.4 | m³/s |
| Temperature of transported air | max 60 | °C |
| Protection/Classification | ||
|---|---|---|
| Enclosure class, motor | IP55 | |
| Insulation class | F | |
| Explosion proof marking | II 2G Ex h IIB+H2 T4 Gb | |
| Certificate | Sira 07ATEX6341X |
| Data according to ErP | ||
|---|---|---|
| ErP ready | Not ErP relevant |
| Controller and Sensors | ||
|---|---|---|
| Ambient and duct temperature | -20 to 60 | °C |
| Dimensions and weights | ||
|---|---|---|
| Duct dimension; Circular, inlet | 250 | mm |
| Duct dimension; Circular, outlet | 250 | mm |
| Weight | 34.5 | kg |
| Others | ||
|---|---|---|
| Duct connection type | Circular | |
| Motor type | AC |
| Motor cable classification without terminal box | ||
|
Wire designation nr. |
Connection designation |
Extra note |
|
1 |
U1 |
|
|
2 |
V1 |
|
|
3 |
W1 |
|
|
4 |
W2 |
|
|
5 |
U2 |
|
|
6 |
V2 |
|
|
7 |
12 |
PTC |
|
8 |
13 |
PTC |
| Hz | Tot | 63 | 125 | 250 | 500 | 1k | 2K | 4K | 8K | |
|
LwA inlet /outlet |
dB(A) |
86 |
79 |
76 |
79 |
79 |
75 |
73 |
71 |
64 |
| Measuring point: qv = 0,3 m3/s, Ps = 196 Pa |
Mid-frequency band, Hz |
A |
ø B |
ø C |
ø D |
ø E |
ø F |
ø H |
I |
|
|
AXCBF-EX 250 |
535 |
448 |
328 |
250 |
238 |
280 |
10 |
4 x 90° |
RFA
DXF
• The fan casing from hot-dip galvanized steel in accordance with EN ISO 1461. Flanges press formed on inlet and outlet side of casing. Flanges and hole pattern in accordance with Eurovent standard.
• Adjustable impeller manufactured from die cast aluminium. Balanced statically and dynamically in accordance with DIN ISO 1940-1, to quality Q = 6,3. Air direction: over motor.
• Additional motor nameplate in metal at the outer fan casing.
• Single or three phase explosion proof IEC motor, ATEX certified, stock range in Ex d with motor cable cast to the
motor, single or dual speed. Insulation class F; protection class IP 55; design B3.
• AXCBF-EX: Bifurcated motor outside the air stream;
| Document filename | Document filetype | |
|---|---|---|
| imo_fans_atex_en_004 | Manual | |
| BVS13 ATEX E 125 X.PDF | Certificate | |
| certificate AXC-EX_AXCBF-EX.pdf | Certificate | |
| EU_DECLARATION_OF_CONFORMITY_ALL_009_314830.PDF | Declaration |