MTP 10
Item #: 32731
The MTP10 potentiometer controls airflow of inline duct fans such as FG..EC, FKD..EC, prioAIR..EC via a stepless signal. The supply voltage is within the range 0 - 12 VDC. The output voltage is adjusted steplessly from 0V to the supply voltage (Us) by a rotary knob.
The potentiometer is equipped with a switch (dry contact) for remote ON / OFF switching of external equipment. Suitable for both for inset (IP44) and surface mounting (IP54).
Technical parameters
| Nominal data | ||
|---|---|---|
| Voltage (nominal) | 10 | V |
| Voltage type | DC |
| Protection/Classification | ||
|---|---|---|
| Enclosure class | IP44 |
| Controller and Sensors | ||
|---|---|---|
| Switching capacity | 4A / 250V | |
| Rangeability | 0...10 V | |
| Control signal | 0...10 kOhm |
| Dimensions and weights | ||
|---|---|---|
| Weight | 0.4 | lb |
| Others | ||
|---|---|---|
| Contact | 1 NO |
|
Us = |
10V Supply |
|
+ = |
0-10V Output signal |
|
- = |
GND |
| Document file name | Document file type | |
|---|---|---|
| DATASHEET_MTP_10.PDF | Brochure | |
| MTP10 Installation manual | Manual | |
| MTP-Declaration of conformity.pdf | Declaration |