This product is discontinued

CB 200-2,1 230V/1 Duct heater

Art. no.: 5384

Electrical duct heater

Duct heater with spigot connection for standard spiral ducts. Manufactured from Aluzinc-coated sheet steel with a heating element in stainless steel. The heater has integral overheating protection with a manual reset function. The CB heater has rubber seals on the connecting spigots. Suitable for control by room thermostat or Pulser. The minimum air volume is based on a minimum air velocity of 1.5 m/s. These duct heaters are designed for a maximum output air temperature of 50°C. The CB can be installed in a horizontal or vertical duct. In a horizontal duct, the connection box should be installed facing upwards, or rotated 90° to one side. Installation with the connection box facing downwards is not allowed.

Technical parameters

Nominal data
Voltage (nominal) 230 V
Phase(s) 1~
Input power 2,100 W
Input current 9.1 A
Air flow min. 50 L/s
Controller and Sensors
Permitted ambient temperature max 30 °C
Dimensions and weights
Duct dimension; Circular, inlet 200 mm
Duct dimension; Circular, outlet 200 mm
Weight 3.8 kg
Others
Duct cooler/heater Electric heater
Duct connection type Circular
A = Heating elements

B

=

Over heat protection with automatic reset

C

=

Over heat protection with manual reset

E

=

Interlocking

F

=

All phase breaker

H

=

Thyristor type Pulser or TTC

ø D = 200 mm