DVV 1000D4-6-XM/120°C+REV

Technické parametry

Roof fan, vertical blowing. The DVV-XS...XP/120 radial fans are intended for the normal daily ventilation, temperature of air up to 120°C. The base plate with inlet cone is made of hot-dip galvanized steel sheet. The outer octagonal casing from seawater-resistant aluminium. Bird protection grill inside casing. The air stream is carried out through annular space between the casing and the motor housing. The fan has a backward curved radial impeller made of galvanized steel. With hub and secured bolted joint directly assembled on the motor shaft. Dynamically balanced according to ISO 1940 T1 quality class G6,3. Driven by two-speed IE1 motor, separate windings (4-6, 6-8), respectively Dahlander (4-8, 6-12). PTC thermal protection serial built-in electric motor. Cooling of the motor with ambient air through an air duct in underpressure system. The motor protection is provided by customers. Connection the fan to the mains in service switch outside on the casing. For speed control use combination of frequency inverter and appropriate filter to motor side (sine or du/dt), respectively observe instructions. EMC protection (for frequency control, if needed) on request, serial not EMC protected cables, cable glands and service switches are used. Flange connection according to EUROVENT. An additional sound attenuator HSDV (preferable factory mounted) is available as accessorie (the marking of the fan with silencer is DVVI).