16A, 400V, IP55, surface-mounting, TK
Артикулен номер: 161206
Motor protection switch by evaluation of the thermal contact,
additional thermal over-current release or magnetic short-circuit trip as line circuit breaker.
The S-DT 16E (for rail mounting) and the S-DT 16 (for wall mounting) switch off the supply voltage to the motor when the thermal contact in the motor windings is tripped. The motor protector is connected to a 400V supply and also to the thermal contact in the motor.
The motor protector is reset by pressing the black button as soon as the motor windings have cooled sufficiently. The motor protector can also be used in conjunction with a transformer. Manually turn on and off with connected motors possible.
An alarm contact (K) is available as an accessory. The alarm contact has an integral potential-free contact producing an external signal when the relay has been tripped.
Номинални данни | ||
---|---|---|
Напрежение (номинално) | 400 | V |
Честота | 50; 60 | Hz |
Фази | 3~ | |
ток | 10 до 16 | A |
Защита/Класификация | ||
---|---|---|
Клас на корпуса | IP55 |
Температура на околната среда и въздуховода | ||
---|---|---|
Позволена температура на околната среда | -25 до 40 | °C |
Размери и тегла | ||
---|---|---|
Дълбочина | 97 | mm |
Височина | 135 | mm |
Широчина | 80 | mm |
Тегло | 0,6 | kg |
Motor protection switch for motors with lead out thermal contacts. Automatic cut out of motor when thermal contact trips (motor overheating). Reset by pressing the black button as soon as the motor windings have cooled sufficiently.
Automatic restart after power failure. Can also be used in conjunction with a transformer. An alarm contact is available as an accessory. The alarm contact has an integral potential-free contact producing an external signal when the relay has been tripped. For wall installation.
Документно име на файл | Документен тип файл | |
---|---|---|
MANUAL_S-DT16_E_.PDF | Ръководство | |
EU Declaration of conformity_004 | Декларация |