Артикулен номер: 5386
Electrical duct heater
Duct heater with spigot connection for standard spiral circular ducts. Manufactured from Aluzinc-coated sheet steel with a heating element in stainless steel. The CB heater has rubber seals on the connecting spigots.
The heater has double integral overheating protection: one with automatic and one with manual reset. Suitable for control by room thermostat or Pulser regulator (additional accessories).
The minimum air volume is based on a minimum air velocity of 1.5 m/s. These duct heaters are designed for a maximum output air temperature of 50°C.
The CB can be installed in a horizontal or vertical position. In a horizontal position, the connection box should be installed facing upwards, or rotated 90° to one side. Installation with the connection box facing downwards is not allowed.
Номинални данни | ||
---|---|---|
Напрежение (номинално) | 230 | V |
Напрежение тип | AC | |
Честота | 50 | Hz |
Фази | 1~ | |
Входна мощност | 3.000 | W |
Входящ ток | 13 | A |
Въздушен дебит | мин. 420 | m³/h |
Температура на околната среда и въздуховода | ||
---|---|---|
Позволена температура на околната среда | max 30 | °C |
Размери и тегла | ||
---|---|---|
Размер на въздуховода; Кръгъл, вход | 315 | mm |
Размер на въздуховода; Кръгъл, изход | 315 | mm |
Тегло | 5,4 | kg |
Други | ||
---|---|---|
Канален охладител / нагревател | Електрически нагревател | |
Тип въздуховодна връзка | Кръгъл |
ø D = | 315 mm |